Abstract:This article investigates shrinkage porosity model for steel ingots with reduction deformation during solidification, and examines the effect of deformation on shrinkage porosities. Experiments and numerical simulations lead to a novel shrinkage porosity criterion, revealing that increased reduction deformation significantly reduces internal micro‐porosity. This relationship provides a predictive tool for managing porosity in steel ingots, enhancing quality and structural integrity. This article studies the shrinkage porosity model for steel ingots with reduction deformation during solidification, and examines the effect of reduction deformation on the shrinkage porosity. Initial investigations involve conducting experiments on reduction deformation during steel ingot solidification, entailing laboratory‐based high‐temperature melting and jack reduction process, with a focus on diverse reduction amounts and cooling times before reduction. Post‐experimental procedures include sample sectioning, acid etching, and low‐magnification structural analysis. Following this, numerical simulations are employed to model the solidification and reduction deformation processes of the steel ingot. Ultimately, a shrinkage porosity criterion model is developed, integrating the equivalent plastic strain resulting from reduction deformation during solidification into the micro‐porosity criterion model. This approach facilitates the prediction of micro‐porosity distribution following reduction deformation. Findings reveal that the shrinkage porosity criterion G2L−5/3ε/εa, which includes the equivalent plastic strain coefficient, effectively predicts the distribution of micro‐porosity subsequent to reduction deformation during steel ingot solidification. A higher reduction amount during the solidification process corresponds to a lowered level of internal micro‐porosity.

Shrinkage Porosity Model for Steel Ingots with Reduction Deformation during Solidification

Simulating Study on the Shrinkage Cavity and Porosity of a Microalloyed Steel Ingot

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Numerical Simulation of Central Shrinkage Crack Formation in a 234-T Steel Ingot

Multiphase Model for the Prediction of Shrinkage Cavity, Inclusion and Macrosegregation in a 36-Ton Steel Ingot

Numerical simulation of shrinkage porosity defect in billet continuous casting

Numerical Simulation of Macrosegregation with Solid Deformation During the Solidification of Steel Ingots Using a Single-Phase/Two-Phase Integrated Model

A review on prediction of casting defects in steel ingots: from macrosegregation to multi-defect model

PREDICTION OF SHRINKAGE CAVITY AND POROSITY IN GRAY CAST IRON DURING SOLIDIFICATION

Influence of Mold Design on Shrinkage Porosity of Ti-6Al-4V Alloy Ingots

Studies on formation of shrinkage cavity and porosity of steel castings by taking filling process into account

Influence of mechanical reduction amount on internal quality of continuous casting billets by thermal and numerical simulation

Internal Shrinkage Crack in a 10 T Water-Cooled Steel Ingot with a Large Height-to-diameter Ratio

A STUDY OF LOCAL EFFECTS OF PORE AND CRITICAL REDUCTION FOR PORE CLOSURE IN HEAVY INGOTS

Evolution of Dendrite Structure and Shrinkage Porosity in 30Cr15Mo1N Ingot with Pouring Rate

Optimization of low-pressure die casting process parameters for reduction of shrinkage porosity in ZL205A alloy casting using Taguchi method

Propagation form of internal cracks induced by continuous casting soft reduction and control strategy for internal quality

Four-Phase Dendritic Model for the Prediction of Macrosegregation, Shrinkage Cavity, and Porosity in A 55-Ton Ingot

Numerical Simulation of Macrosegregation in a 535 Tons Steel Ingot with a Multicomponent-Multiphase Model

Modelling of continuous casting processes parameters on the shrinkage cavity formation in bearing steel blooms

Effect of soft reduction process on segregation of a 400 mm thick high-alloy steel slab