Abstract:The PDEDTQ is introduced as the third component into the JD40‐BDD20:PA‐5 host blend to fabricate the high‐performance ternary all‐polymer solar cells (all‐PSCs) with a power conversion efficiency (PCE) of 18.47%. It can not only transfer energy to JD40‐BDD20 and form extra exciton dissociation channels, but also regulate the miscibility between JD40‐BDD20 and PA‐5 to form a high‐quality network with uniform distribution on the micron scale. Herein, efficient ternary all‐polymer solar cells (all‐PSCs) are fabricated by employing PDEDTQ that possesses down‐shifted highest occupied molecular orbital (HOMO) level and blue‐shifted absorption with higher maximum absorption coefficients compared with the host donor JD40‐BDD20 as a guest donor into the JD40‐BDD20:PA‐5 host blend. The enhanced light‐harvesting and the energy transfer from PDEDTQ to JD40‐BDD20 can be observed in the ternary device, which conduces to improving the short circuit current density (JSC). Additionally, the PDEDTQ shows relatively weak crystalline and well miscibility with the JD40‐BDD20, meaning that the morphology can be tuned using the PDEDTQ. Subsequently, a more uniform and fine‐divided network with slightly weakened crystalline occurs in the ternary blend film, implying that a more intermixing domain with a higher density of donor/acceptor (D/A) interfaces may be formed. Thus, compared with JD40‐BDD20:PA‐5, the ternary device obtained enhanced exciton dissociation and charge extraction, reducing charge recombination and energy loss (Eloss). Ultimately, in addition to guaranteeing outstanding fill factor (FF), the higher JSC and improve open circuit voltage (VOC) are achieved and then boosted the power conversion efficiency (PCE) from 17.39% to 18.47%, which is one of the highest PCEs for the all‐PSCs. Overall, this work provides guidance on forming a high‐quality network with uniform distribution of D/A using ternary strategy, and then obtaining high‐efficiency all‐PSCs processed using non‐halogenated solvent.

Approaching 18% efficiency of ternary layer-by-layer polymer solar cells with alloyed acceptors

Two Compatible Acceptors As an Alloy Model with a Halogen-Free Solvent for Efficient Ternary Polymer Solar Cells

Alloy-like ternary polymer solar cells with over 17.2% efficiency

Layer‐by‐Layer‐Processed Ternary All‐polymer Organic Solar Cells with 17.74% Efficiency Enabled by introducing a designed narrow‐bandgap guest polymer acceptor

Ternary Polymer Solar Cells Enabled Using Two Donor Polymers with Broad Absorption and Cascade LUMO Levels

Ternary Polymer Solar Cells Based-on Two Polymer Donors with Similar HOMO Levels and an Organic Acceptor with Absorption Extending to 850 Nm

Ternary All‐Polymer Solar Cells with Efficiency up to 18.14% Employing a Two‐Step Sequential Deposition

Efficient Non-Halogenated Solvent Processed Ternary All-Polymer Solar Cells with A Favorable Morphology Enabled by Two Well-Compatible Donors.

Molecular Interactions Regulation by Adding a Third Component with High Miscibility Suppresses the Energetic Disorder and Reduces Energy Loss for Efficient Ternary Solar Cells

A Minimal Benzo[c][1,2,5]thiadiazole-Based Electron Acceptor As a Third Component Material for Ternary Polymer Solar Cells with Efficiencies Exceeding 16.0%

Molecular interaction regulation by adding a third component with high miscibility suppresses the energetic disorder and reduces energy loss for efficient ternary solar cells

Smart Ternary Strategy in Promoting the Performance of Polymer Solar Cells Based on Bulk‐Heterojunction or Layer‐By‐Layer Structure

High‐Performance Ternary Organic Solar Cells with Enhanced Luminescence Efficiency and Miscibility Enabled by Two Compatible Acceptors

Two Y6 Derivations with Similar Chemical Structure As One Alloyed Acceptor Enable Efficient Ternary-Blend Polymer Solar Cells

Ternary Strategy Enables Non‐Halogenated Solvent‐Processed All‐Polymer Solar Cells with High Efficiency Over 18%

Over 19.1% efficiency for sequentially spin-coated polymer solar cells by employing ternary strategy

Two Compatible Nonfullerene Acceptors with Similar Structures As Alloy for Efficient Ternary Polymer Solar Cells

Ternary Polymer Solar Cells with High Efficiency of 14.24% by Integrating Two Well‐Complementary Nonfullerene Acceptors

Synergistically minimized nonradiative energy loss and optimized morphology achieved via the incorporation of small molecule donor in 17.7% efficiency ternary polymer solar cells

Enhanced Photovoltaic Performances Via Ternary Blend Strategy Employing a Medium-Bandgap D-A Type Alternating Copolymer As the Single Donor

Improved Molecular Ordering in a Ternary Blend Enables All‐Polymer Solar Cells over 18% Efficiency