Abstract:The PDEDTQ is introduced as the third component into the JD40‐BDD20:PA‐5 host blend to fabricate the high‐performance ternary all‐polymer solar cells (all‐PSCs) with a power conversion efficiency (PCE) of 18.47%. It can not only transfer energy to JD40‐BDD20 and form extra exciton dissociation channels, but also regulate the miscibility between JD40‐BDD20 and PA‐5 to form a high‐quality network with uniform distribution on the micron scale. Herein, efficient ternary all‐polymer solar cells (all‐PSCs) are fabricated by employing PDEDTQ that possesses down‐shifted highest occupied molecular orbital (HOMO) level and blue‐shifted absorption with higher maximum absorption coefficients compared with the host donor JD40‐BDD20 as a guest donor into the JD40‐BDD20:PA‐5 host blend. The enhanced light‐harvesting and the energy transfer from PDEDTQ to JD40‐BDD20 can be observed in the ternary device, which conduces to improving the short circuit current density (JSC). Additionally, the PDEDTQ shows relatively weak crystalline and well miscibility with the JD40‐BDD20, meaning that the morphology can be tuned using the PDEDTQ. Subsequently, a more uniform and fine‐divided network with slightly weakened crystalline occurs in the ternary blend film, implying that a more intermixing domain with a higher density of donor/acceptor (D/A) interfaces may be formed. Thus, compared with JD40‐BDD20:PA‐5, the ternary device obtained enhanced exciton dissociation and charge extraction, reducing charge recombination and energy loss (Eloss). Ultimately, in addition to guaranteeing outstanding fill factor (FF), the higher JSC and improve open circuit voltage (VOC) are achieved and then boosted the power conversion efficiency (PCE) from 17.39% to 18.47%, which is one of the highest PCEs for the all‐PSCs. Overall, this work provides guidance on forming a high‐quality network with uniform distribution of D/A using ternary strategy, and then obtaining high‐efficiency all‐PSCs processed using non‐halogenated solvent.

Ternary All‐Polymer Solar Cells with Efficiency up to 18.14% Employing a Two‐Step Sequential Deposition

Layer‐by‐Layer‐Processed Ternary All‐polymer Organic Solar Cells with 17.74% Efficiency Enabled by introducing a designed narrow‐bandgap guest polymer acceptor

Improved Molecular Ordering in a Ternary Blend Enables All‐Polymer Solar Cells over 18% Efficiency

Over 18% efficiency ternary all-polymer solar cells with high photocurrent and fill factor

All‐Polymer Solar Cells with 17% Efficiency Enabled by the "End‐Capped" Ternary Strategy

Smart Ternary Strategy in Promoting the Performance of Polymer Solar Cells Based on Bulk‐Heterojunction or Layer‐By‐Layer Structure

Highly Efficient Ternary All‐Polymer Solar Cells with Enhanced Stability

Achieving over 17% efficiency of ternary all-polymer solar cells with two well-compatible polymer acceptors

Ternary Strategy Enables Non‐Halogenated Solvent‐Processed All‐Polymer Solar Cells with High Efficiency Over 18%

Alloy-like ternary polymer solar cells with over 17.2% efficiency

Layer-by-layer processed binary all-polymer solar cells with efficiency over 16% enabled by finely optimized morphology

Regulating Phase Separation Kinetics for High‐efficiency and Mechanically Robust All‐Polymer Solar Cells

18.1% Ternary All‐Polymer Solar Cells Sequentially Processed from Hydrocarbon Solvent with Enhanced Stability

A chlorinated polymer promoted analogue co-donors for efficient ternary all-polymer solar cells

Over 19.1% efficiency for sequentially spin-coated polymer solar cells by employing ternary strategy

Manipulating Polymer Backbone Configuration via Halogenated Asymmetric End-Groups Enables Over 18% Efficiency All-Polymer Solar Cells

Achieving 15.81% and 15.29% Efficiency of All-Polymer Solar Cells Based on Layer-by-layer and Bulk Heterojunction Structures

High‐Performance Binary All‐Polymer Solar Cells with Efficiency Over 18.3% Enabled by Tuning Phase Transition Kinetics

Synergistically minimized nonradiative energy loss and optimized morphology achieved via the incorporation of small molecule donor in 17.7% efficiency ternary polymer solar cells

Layer‐by‐Layer All‐Polymer Solar Cells Approaching 19% with Dual‐Donor Modulation of an Interpenetrating Network

Effective Regulation of Morphologies and Exciton‐Generation Process Enables Quasi‐Planar All‐Polymer Organic Solar Cells Exceed 18% Efficiency