Abstract:A series of nonfullerene acceptors (IOTC, IETC, IOPC and IEPC) have been designed and synthesized by using asymmetric indenothiophene as an electron-donating core. Different side chains (linear 4-n-octylphenyl and branched 4-(2-ethylhexyl)phenyl), and electron-withdrawing units (2-(3-oxo-2,3-dihydroinden-1-ylidene)malononitrile and 2-(6-oxo-5,6-dihydro-4H-cyclopenta[c]thiophen-4-ylidene)malononitrile) were used to tune the optoelectronic properties of the resulting indenothiophene-based nonfullerene acceptors. With a benchmark p-type copolymer of PBDB-T, the best-performance binary devices based on IOTC and IETC (both with the ending group of 2-(6-oxo-5,6-dihydro-4H-cyclopenta[c]thiophen-4-ylidene)malononitrile) exhibited power conversion efficiencies (PCEs) of 7.94% and 7.40%, respectively. Whereas, the devices based on IOPC and IEPC (both with the ending group of 2-(3-oxo-2,3-dihydroinden-1-ylidene)malononitrile) showed relatively low PCEs of 4.86% and 5.26%, respectively. The improved photovoltaic properties of IOTC- and IETC-based binary devices are mainly attributed to their higher hole- and electron-mobilities compared to those of IOPC- and IEPC-based counterparts. In order to improve the light-harvesting ability of the binary PBDB-T:IOTC in the short wavelength region, PC71BM was introduced as the second acceptor to form a ternary blend of PBDB-T:IOTC:PC71BM. After optimization, the ternary blend of PBDB-T:IOTC:PC71BM with a weight ratio of 1:1:0.5 achieved a best PCE of 9.85% with a short-circuit current density (Jsc) of 16.35 mA/cm(2), and a fill factor (FF) of 64.90%, much higher than the corresponding binary blend based on either PBDB-T:IOTC or PBDB-T:PC71BM. We further demonstrated that the addition of PC71BM not only improved the light absorption but also enhanced the carrier mobilities of the ternary blend thereby increasing the final PCE.

Enhanced Photovoltaic Performances Via Ternary Blend Strategy Employing a Medium-Bandgap D-A Type Alternating Copolymer As the Single Donor

Ternary Polymer Solar Cells Based-on Two Polymer Donors with Similar HOMO Levels and an Organic Acceptor with Absorption Extending to 850 Nm

Ternary Nonfullerene Polymer Solar Cells with a Power Conversion Efficiency of 11.6% by Inheriting the Advantages of Binary Cells

Ternary Polymer Solar Cells Enabled Using Two Donor Polymers with Broad Absorption and Cascade LUMO Levels

Ternary Polymer Solar Cells with Low-Cost P3HT as the Second Donor by the Complementary Absorption Region from Long-Wavelength to Medium-Wavelength Regions Forming Cascaded HOMO and LUMO Energy Levels

Improved photon-to-electron response of ternary blend organic solar cells with a low band gap polymer sensitizer and interfacial modification

Asymmetric Indenothiophene-Based Nonfullerene Acceptors for Binary- and Ternary-Blend Polymer Solar Cells

Ternary All-Polymer Solar Cells with Two Synergetic Donors Enable Efficiency over 14.5%

Efficient Non-Halogenated Solvent Processed Ternary All-Polymer Solar Cells with A Favorable Morphology Enabled by Two Well-Compatible Donors.

A Minimal Benzo[c][1,2,5]thiadiazole-Based Electron Acceptor As a Third Component Material for Ternary Polymer Solar Cells with Efficiencies Exceeding 16.0%

Ternary Polymer Solar Cells with High Efficiency of 14.24% by Integrating Two Well‐Complementary Nonfullerene Acceptors

High-Performance Ternary Polymer Solar Cells from A Structurally Similar Polymer Alloy

Realization of Performance Enhancement in Ternary Polymer Solar Cells by Broad Absorption, Efficient Energy Transfer, and Balanced Charge Carrier Mobility

Ternary Solar Cells Via Ternary Polymer Donors and Third Component PC71BM to Optimize Morphology with 13.15% Efficiency

High-Performance Ternary Polymer Solar Cells Enabled by Using a Branched Polymer As the Guest Donor

High-Performance Ternary Nonfullerene Polymer Solar Cells with Both Improved Photon Harvesting and Device Stability.

Ternary All-Polymer Solar Cells with 8.5% Power Conversion Efficiency and Excellent Thermal Stability.

Efficient Dual Mechanisms Boost the Efficiency of Ternary Solar Cells with Two Compatible Polymer Donors to Exceed 19

A Novel Wide‐Bandgap Polymer with Deep Ionization Potential Enables Exceeding 16% Efficiency in Ternary Nonfullerene Polymer Solar Cells

Insight into the Role of PC71BM on Enhancing the Photovoltaic Performance of Ternary Organic Solar Cells

Constructing High-Performance Ternary Device Using Analogous Polymer Donors