Abstract:Silica aerogels are remarkable materials with excellent physicochemical properties, such as high porosity and surface area, along with low density and thermal conductivity. In addition to their outstanding properties, these materials are quite interesting due to the possibility to change their chemistry according to intended applications. However, they also show some disadvantages, like low mechanical strength and poor dimensional stability under high temperatures (above 600 °C). Although these aerogels are frequently used as thermal insulators, for high temperature environments some of their properties need to be improved. The mixing with other ceramic thermally resistant phases is a viable approach. Thus, this work presents an overview on alumina-silica-based aerogels, describing their synthesis, processing and properties. The improvement on their properties will be discussed as a function of the amount of refractory phase (alumina) in the silica matrix. The introduction of the alumina phase makes them stable until 1200-1400 °C, maintaining low values of thermal conductivity at very high temperature (below 81 mW m-1 K-1). Finally, a brief survey on the most promising applications of these materials is presented, with several examples. In catalysis, alumina-silica aerogels have shown equivalent performance when compared to reference catalysts. In the field of thermal insulation, these materials show great potential, especially in high temperatures environments, due to their thermal dimensional stability and inherent low thermal conductivity. As adsorbents, higher stability and adsorption capacity were obtained with the incorporation of the alumina phase in silica aerogels, and these materials can be reused for repeated adsorption/desorption cycles. Indeed, a significant improvement of the aerogel performance by the synergetic effect of combining silica and alumina phases is usually obtained, supporting the expectation of the extension of their fields of application.

Porous alumina-spinel ceramics for high temperature applications

Porous MgO-based ceramics synthesized by the volume expansion effect: Designing and performance

Impact of Distinct Ca$^{2+}$ Sources on the Physical Properties of Alumina-based Macroporous Refractories for Thermal Insulation at High Temperature

Preparation and Characterization of Porous Mgal2o4 Spinel Ceramic Supports from Bauxite and Magnesite

Synthesis and Characterization of Porous Magnesium Aluminate Spinel by Hydrothermal Process

Al$_2$O$_3$-CaO macroporous ceramics containing hydrocalumite-like phases

Hierarchically porous Al2TiO5 ceramics via freeze-gel casting

Recycling bagasse and rice hulls ash as a pore‐forming agent in the fabrication of cordierite‐spinel porous ceramics

Intragranular Porous Aluminum Titanate Ceramics with Low Thermal Expansion and High Strength Simultaneously

An overview on alumina-silica-based aerogels

A novel low thermal conductivity refractory aggregate for high-temperature applications: Lightweight microporous alumina-rich spinel (Mg0.4Al2.4O4)

Enhancing semi‐insulating refractory performance with polymeric microspheres and distinct calcium aluminate cements

Air permeable alumina-based porous ceramics with high performance prepared by novel gel casting route

Preparation and properties of porous ceramics based on alumomagnesium spinel and zirconium dioxide

Effect of Sintering Temperature on the Structures and Properties of Porous Aluminium Titanate Ceramics

Study on magnesia alumina spinel heat storage ceramics for solar thermal power generation

Novel silica-modified boehmite aerogels and fiber-reinforced insulation composites with ultra-high thermal stability and low thermal conductivity

Porous ceramics based on high-thermal-stability Al2O3–ZrO2 nanofibers for thermal insulation and sound absorption applications

Alumina-Doped Silica Aerogels for High-Temperature Thermal Insulation

Preparation of Porous Ceramic Materials by Alumina Fiber Framework

Stabilization of thermal storage ceramics via the phase reconstruction of ferrotitanium slag and migration of Mg element