Abstract:Silica aerogels are remarkable materials with excellent physicochemical properties, such as high porosity and surface area, along with low density and thermal conductivity. In addition to their outstanding properties, these materials are quite interesting due to the possibility to change their chemistry according to intended applications. However, they also show some disadvantages, like low mechanical strength and poor dimensional stability under high temperatures (above 600 °C). Although these aerogels are frequently used as thermal insulators, for high temperature environments some of their properties need to be improved. The mixing with other ceramic thermally resistant phases is a viable approach. Thus, this work presents an overview on alumina-silica-based aerogels, describing their synthesis, processing and properties. The improvement on their properties will be discussed as a function of the amount of refractory phase (alumina) in the silica matrix. The introduction of the alumina phase makes them stable until 1200-1400 °C, maintaining low values of thermal conductivity at very high temperature (below 81 mW m-1 K-1). Finally, a brief survey on the most promising applications of these materials is presented, with several examples. In catalysis, alumina-silica aerogels have shown equivalent performance when compared to reference catalysts. In the field of thermal insulation, these materials show great potential, especially in high temperatures environments, due to their thermal dimensional stability and inherent low thermal conductivity. As adsorbents, higher stability and adsorption capacity were obtained with the incorporation of the alumina phase in silica aerogels, and these materials can be reused for repeated adsorption/desorption cycles. Indeed, a significant improvement of the aerogel performance by the synergetic effect of combining silica and alumina phases is usually obtained, supporting the expectation of the extension of their fields of application.

Novel silica-modified boehmite aerogels and fiber-reinforced insulation composites with ultra-high thermal stability and low thermal conductivity

Alumina-Doped Silica Aerogels for High-Temperature Thermal Insulation

Fabrication of Al2O3 aerogel-SiO2 fiber composite with enhanced thermal insulation and high heat resistance

Highly Thermally Stable Alumina-Based Aerogels Modified by Partially Hydrolyzed Aluminum Tri-Sec-butoxide

Preparation of monolithic Al2O3–SiO2 aerogels with high-temperature resistance using boehmite nanorods

SiOC nanospheres reinforced silica aerogel with excellent compatibility and excellent thermal insulation under high temperature conditions

Design and preparation of novel Y2O3-SiO2 composite aerogels for high-temperature thermal insulators

Ultralight, thermal insulating, and high-temperature-resistant mullite-based nanofibrous aerogels

Novel Al2O3–SiO2 composite aerogels with high specific surface area at elevated temperatures with different alumina/silica molar ratios prepared by a non-alkoxide sol–gel method

Effect of Titanium Dioxide Particles on the Thermal Stability of Silica Aerogels

Highly thermally stable zirconia/silica composite aerogels prepared by supercritical deposition

High-temperature microtexture, microstructure evolution, and thermal insulation properties of porous Si3N4/silica aerogel composites produced by impregnation

Synthesis of Al2O3-SiO2 aerogels with low thermal conductivity and high strength by methyltriethoxysilane as a silica precursor

Opacifier embedded and fiber reinforced alumina-based aerogel composites for ultra-high temperature thermal insulation

An overview on alumina-silica-based aerogels

A Facile Method to Fabricate Al2O3-SiO2 Aerogels with Low Shrinkage up to 1200 °C

Carbonaceous ceramic nanofibrous aerogels for high-temperature thermal superinsulation

Synthesis of a novel Al 2 O 3 –SiO 2 composite aerogel with high specific surface area at elevated temperatures using inexpensive inorganic salt of aluminum

Preparation and properties of low-density and high-temperature resistant yttrium doped silica aerogels

Fabrication of the SiC/HfC Composite Aerogel with Ultra-Low Thermal Conductivity and Excellent Compressive Strength

Rapid preparation of Palygorskite/Al2O3 composite aerogels with superhydrophobicity, high-temperature thermal insulation and improved mechanical properties