Abstract:A highly sensitive optical fiber gas pressure sensor with temperature monitoring is proposed and demonstrated. It is based on a slightly tapered fiber with an inner micro-cavity forming an in-fiber Mach–Zehnder interferometer (MZI), and a micro-channel is drilled into the lateral wall of the in-fiber micro-cavity using a femtosecond laser to allow gas to flow in. Due to the dependence of the refractive index (RI) of air inside the micro-cavity on its gas pressure and the high RI sensitivity of the MZI, the device is extremely sensitive to gas pressure. To prevent fiber breakage, the MZI is housed in a silicate capillary tube with an air inlet. Multiple modes are excited by slightly tapering the inner micro-cavity, and the resonance dips in the sensor's transmission spectrum feature different linear gas pressure and temperature responses, so a sensitivity matrix algorithm can be used to achieve simultaneous demodulation of two parameters, thus resolving the temperature crosstalk. As expected, the experimental results demonstrated the reliability of the matrix algorithm, with pressure sensitivity reaching up to ~−12.967 nm/MPa and temperature sensitivity of ~89 pm/°C. The features of robust mechanical strength and high air pressure sensitivity with temperature monitoring imply that the proposed sensor has good practical and application prospects.

Optical Fiber Gas Pressure Sensor Based on Polydimethylsiloxane Microcavity

Gas Pressure Sensors Based on In-Fiber Devices

Membrane-free fiber-optic Fabry-Perot gas pressure sensor with Pa-level resolution

Double F-P Interference Optical Fiber High Temperature Gas Pressure Sensor Based on Suspended Core Fiber

A High-Sensitivity Fiber-optic Fabry-Perot Gas Pressure Sensor with Epoxy Resin Adhesive

A high-sensitivity air pressure sensor with short desorbing time

An ultra-sensitive gas pressure sensor based on tapered fiber coated with PDMS film working at TAP

Highly Sensitive Gas Pressure Sensing with Temperature Monitoring Using a Slightly Tapered Fiber with an Inner Micro-Cavity and a Micro-Channel

Compact highly sensitive Fabry-Perot temperature and gas pressure sensing probe fabricated by a femtosecond laser and PDMS

Anti-crosstalk optical fiber sensor based on polydimethyl siloxane fluid cavity and graphene oxide film

High-Sensitivity Gas Pressure Sensor Based on Fabry–Pérot Interferometer with a Side-Opened Channel in Hollow-Core Photonic Bandgap Fiber

High sensitivity temperature and gas pressure sensor based on PDMS sealed tapered hollow-core fiber

Design and Analysis of a Micro Pressure Sensor with Optical Fiber

High sensitivity gas pressure and temperature optical sensors based on tapered no-core fiber coated with polydimethylsiloxane (PDMS)

Optical Micro-Electro-Mechanical-System Pressure Sensor Based on Light Intensity Modulation

Temperature-Insensitive Gas Pressure Sensor Based on Photonic Crystal Fiber Interferometer

High Sensitivity Fiber Gas Pressure Sensor with Two Separated Fabry-Perot Interferometers Based on the Vernier Effect

High pressure sensor based on intensity-variation using polymer optical fiber

Optical fiber Fabry-Perot silica-microprobe for a gas pressure sensor

Fabry-Perot cavity filled with PDMS for high sensitivity gas pressure sensor

An Optical Fiber Pressure Sensor Based on F-P Interferometry and Intensity Demodulation