Abstract:Modern heating furnaces use combined modes of heating the charge. At high heating temperatures, more radiation heating is used; at lower temperatures, more convection heating is used. In large heating furnaces, such as pusher furnaces, it is necessary to monitor the heating of the material zonally. Zonal heating allows the appropriate thermal regime to be set in each zone, according to the desired parameters for heating the charge. The problem for each heating furnace is to set the optimum thermal regime so that at the end of the heating, after the material has been cross-sectioned, there is a uniform temperature field with a minimum temperature differential. In order to evaluate the heating of the charge, a mathematical model was developed to calculate the heat fluxes of the moving charge (slabs) along the length of the pusher furnace. The obtained results are based on experimental measurements on a test slab on which thermocouples were installed, and data acquisition was provided by a TERMOPHIL-stor data logger placed directly on the slab. Most of the developed models focus only on energy balance assessment or external heat exchange. The results from the model created showed reserves for changing the thermal regimes in the different zones. The developed model was used to compare the heating evaluation of the slabs after the rebuilding of the pusher furnace. Changing the furnace parameters and altering the heat fluxes or heating regimes in each zone contributed to more uniform heating and a reduction in specific heat consumption. The developed mathematical heat flux model is applicable as part of the powerful tools for monitoring and controlling the thermal condition of the charge inside the furnace as well as evaluating the operating condition of such furnaces.

Tube furnace with five temperature zones

Study on Billet Temperature Prediction and Furnace Temperature Optimal Setting of Regenerative Reheating Furnace

A new type of heating furnace adopting controllable hybrid technique

A Simplified Simulation Model of Steady Temperature for Tubular Furnace

Hot air circulation system and heating and cooling furnace

Model and Simulation of the Furnace Temperature Uniformity of Pit Type Heating Furnace

Numerical simulation of temperature field during heating process in vacuum heat treatment furnace

Experimental study of the effect of a radiant tube on the temperature distribution in a horizontal heating furnace

Novel Matching Strategy for the Coupling of Heat Flux in Furnace Side and CO2 Temperature in Tube Side to Control the Cooling Wall Temperatures

Optimization Model Design for Temperature Curve of Reflow Furnace

3-D Numerical Simulation of Heat Transfer Process in Vacuum Heat Treatment Furnace

Modeling and Analysis of Temperature Compensation for Multi-temperature Zone Sintering Furnace Temperature Sensing

Zone Method Based Coupled Simulation of Industrial Steam Cracking Furnaces

Three-dimensional Numerical Simulation of Temperature Field of Heat Treatment Furnaces

Modeling and Simulation of Heat Transfer in Loaded Continuous Heat Treatment Furnace

Modeling of Heat Flux in a Heating Furnace

Development of ZQL-80B Gas Quenching Vacuum Furnace

High temperature furnace pipe residue lifetime estimation method and device

System identification and temperature control of a tube furnace

Feed Furnace Temperature Control Based on the Distributed Deviations

Numerical simulation and optimization of steel tube billet heating process in rotary hearth furnace using CFD