Abstract:<p>For a heat treatment furnace, the precise study of the flow characteristics, combustion and heat transfer in the furnace is essential to know the temperature distribution in a slab during the heating process. In this context several different three-dimensional CFD (Computational Fluid Dynamics) models have been developed to simulate the combustion and heat transfer process in the furnace. These models were developed based on direct fired reheating furnaces with continuous fuel input. In this paper, a novel three-dimensional transient CFD model used to investigate the slab heating characteristics in the heat treatment furnace with pulse combustion was developed. The transient calculation in the furnace was performed based on the steady-state simulation of the furnace temperature, and the movement of slabs on the rollers in the furnace was simulated using dynamic mesh. By comparison, the results from the EDC with two different reaction mechanisms showed good consistency. However, the EDC with the two-step reaction mechanism required one fifth the calculation time of the EDC with the GRI-Mech3.0, and was thus the preferred model. In contrast to direct fired reheating furnaces, the outer radiant tube walls were treated as the coupled boundary conditions in the model to realize indirect heat transfer between the process gas in the furnace and the combustion gas in the radiant tubes. Furthermore, a pulse combustion method was proposed to control the working states of the burners based on UDF (User-Defined Function), in order to realize the pulse combustion process in the heat treatment furnace. By the validation of "Black Box", the temperature variation of the slab and the gas temperature in the furnace predicted by the model agreed well with the experimental results. The simulation revealed that the temperature distribution of the radiant tubes and furnace gas was uniform and the maximum temperature difference on the outer radiant tube walls was less than 84 K. During the slab transient heating process, the slab temperature distribution became more uniform in the soaking zone and the maximum temperature difference along the thickness of the slab was below 13 K at discharge.</p>

Modeling and Simulation of Heat Transfer in Loaded Continuous Heat Treatment Furnace

Heating and Heat-Flow Simulation

Numerical analysis of the heat transfer of radiant tubes and the slab heating characteristics in an industrial heat treatment furnace with pulse combustion

Mathematical Model of a Continuous Galvanizing Annealing Furnace

Simulation and application of dynamic heat transfer model for improvement of continuous casting process

Heat Transfer Simulation for Covers in Continuous Casting Process of Steel and Its Application

Heat-transfer and solidification model of continuous slab casting: CON1D

Modeling approach and numerical analysis of a roller-hearth reheating furnace with radiant tubes and heating process optimization

3D Transient Heat Transfer Simulation and Optimization for Initial Stage of Steel Continuous Casting Process

Finite difference heat-transfer modeling for continuous casting

Development of a continuous reheating furnace state-space model based on the finite volume method

A Three Dimensional Real-time Heat Transfer Model for Continuous Casting Blooms

Experimental validation of a quasi-transient coupling approach for the modeling of heat transfer in autoclave processing

Research on Temperature Change of Reflow Furnace Based On Mathematical Modeling

Fluid Dynamic Numerical Simulation Coupled With Heat Transfer And Reaction In The Tubular Reactor Of Industrial Cracking Furnaces

Solving the heat transfer boundary condition of billet in reheating furnace by combining “black box” test with mathematic model

Modeling of Heat Flux in a Heating Furnace

Applying of Real-time Heat Transfer and Solidification Model on the Dynamic Control System of Billet Continuous Casting

A Simplified Simulation Model of Steady Temperature for Tubular Furnace

Numerical Analysis of Fluid Flow and Heat Transfer by Means of a Unified Model in a Direct Current Electric Arc Furnace

Cfd -Based Modelling On Inter Facial Heat Transfer For Water Quenching