Abstract:<p>For a heat treatment furnace, the precise study of the flow characteristics, combustion and heat transfer in the furnace is essential to know the temperature distribution in a slab during the heating process. In this context several different three-dimensional CFD (Computational Fluid Dynamics) models have been developed to simulate the combustion and heat transfer process in the furnace. These models were developed based on direct fired reheating furnaces with continuous fuel input. In this paper, a novel three-dimensional transient CFD model used to investigate the slab heating characteristics in the heat treatment furnace with pulse combustion was developed. The transient calculation in the furnace was performed based on the steady-state simulation of the furnace temperature, and the movement of slabs on the rollers in the furnace was simulated using dynamic mesh. By comparison, the results from the EDC with two different reaction mechanisms showed good consistency. However, the EDC with the two-step reaction mechanism required one fifth the calculation time of the EDC with the GRI-Mech3.0, and was thus the preferred model. In contrast to direct fired reheating furnaces, the outer radiant tube walls were treated as the coupled boundary conditions in the model to realize indirect heat transfer between the process gas in the furnace and the combustion gas in the radiant tubes. Furthermore, a pulse combustion method was proposed to control the working states of the burners based on UDF (User-Defined Function), in order to realize the pulse combustion process in the heat treatment furnace. By the validation of "Black Box", the temperature variation of the slab and the gas temperature in the furnace predicted by the model agreed well with the experimental results. The simulation revealed that the temperature distribution of the radiant tubes and furnace gas was uniform and the maximum temperature difference on the outer radiant tube walls was less than 84 K. During the slab transient heating process, the slab temperature distribution became more uniform in the soaking zone and the maximum temperature difference along the thickness of the slab was below 13 K at discharge.</p>

Fluid Dynamic Numerical Simulation Coupled With Heat Transfer And Reaction In The Tubular Reactor Of Industrial Cracking Furnaces

Development and Application of Industrial Catalytic Cracking Process Online Calculation

Modeling, Simulation and Optimization of Commercial Naphtha Catalytic Reforming Process

Numerical Analysis of Industrial Styrene Polymerization in Nonideal Tower Reactors

Modeling and Optimization of Ethane Steam Cracking Process in An Industrial Tubular Reactor with Improved Reaction Scheme

Coupled Simulation of Recirculation Zonal Firebox Model and Detailed Kinetic Reactor Model in an Industrial Ethylene Cracking Furnace

CFD Simulation of Propane Cracking Tube Using Detailed Radical Kinetic Mechanism

Recirculation and reaction hybrid intelligent modeling and simulation for industrial ethylene cracking furnace

A fast simulation algorithm for industrial cracking furnaces

Molecular-Level-Process Model with Feedback of the Heat Effects on a Complex Reaction Network in a Fluidized Catalytic Cracking Process

Numerical Simulation on Gas-Solid Two-Phase Turbulent Flow in Fcc Riser Reactors (I) Turbulent Gas-Solid Flow-Reaction Model

Numerical Simulation on Gas-Solid Two-Phase Turbulent Flow in Fcc Riser Reactors (ii) Numerical Simulation on the Gas-Solid Two-Phase Turbulent Flow

Simulation Analysis of Gas-Solid Two-Phase Flow and Reaction in a Novel Catalytic Cracking Reactor

Simulation for Naphtha Pyolysis in Clear Radiation Tube of SRT-IV Cracking Furnace

Numerical analysis of the heat transfer of radiant tubes and the slab heating characteristics in an industrial heat treatment furnace with pulse combustion

A Gas-solid two-phase flow-reaction model of FCC riser reactors and numerical simulation for them: I . Development of the gas-solid two-phase flow-reaction model

A coupling model of fluid catalytic cracking and diesel hydrotreating processes to study the effects of reaction temperature on the composition of diesel

Numerical Investigations on the Molecular Reaction Model for Thermal Cracking of n-Decane at Supercritical Pressures.

Numerical simulation on the gas-liquid-solid three-phase flow-reaction in fcc riser reactors I. Development of the gas-liquid-solid three-phase flow-reaction model

A gas-solid two-phase flow-reaction model of the FCC riser reactors and numerical simulation for them: II . Numerical simulation on the gas-solid two-phase flow and reaction of commercial riser reactors

Periodic Simulation for Naphtha Pyrolysis in SRT-IV Cracking Furnace