Abstract:Cu12Sb4S13 is a very potential non-toxic, earth-abundant absorber material for thin film solar cells yet its photovoltaic related properties are rarely explored so far. In this paper, we first developed a hydrazine solution process to fabricate phase-pure, highly crystalline, large grain Cu12Sb4S13 film and then carried out investigations to study the chemical, optical and electrical properties of Cu12Sb4S13 film in detail. Careful X-ray photoelectron spectroscopy (XPS) measurements indicated Cu12Sb4S13 could be oxidized into Cu3SbS4 in a sulfur rich atmosphere at elevated temperature, and the valance states of our Cu12Sb4S13 are determined as Cu+12Sb3+3Sb5+1S2−13 rather than the previously reported Cu+10Cu22+Sb3+4S2−13. Optical absorption investigation showed that Cu12Sb4S13 has a direct band gap of 1.47 eV. Ultraviolet photoelectron spectroscopy (UPS) study revealed that the conduction band and valence band are located at −3.52 eV and −4.99 eV relative to the vacuum level, respectively. Finally, we built a photodetector based on Cu12Sb4S13 film achieving 0.15 A/W responsivity and a heterojunction solar cell having 0.04% solar conversion efficiency. Our preliminary experimental study indicated that Cu12Sb4S13 may be a very attractive absorber material for photovoltaic application.

A facile synthesis of a copper(I) thiourea sulphate complex and its application for highly efficient chalcopyrite solar cells

In Situ Synthesis of Metal Sulfide Nanoparticles Based on 2D Metal-Organic Framework Nanosheets.

Formation of Alloyed Cu2Cox Zn1-x Sn(S,Se)4 Absorption Layer and Its Application in Solar Cells

Formation of Alloyed Cu2CoxZn1-xSn(S,Se)4 Absorption Layer and Its Application in Solar Cells.

Air‐Stable, Low‐Toxicity Precursors for CuIn(SeS)2 Solar Cells with 10.1 % Efficiency

A Facile Molecular Precursor-Based Cu(In,Ga)(S,Se)2solar Cell with 8.6% Efficiency

Preparation and Characterization of Cuins2 Thin Films for Solar Cells by Chemical Bath Deposition

Chemical synthesis of Cu(In) metal inks to prepare CuInS2 thin films and solar cells

One-pot, Rapid Synthesis of Chalcopyrite CuInSe2 Nanoparticles for Low-Cost Thin Film Solar Cell

Synthesis and Characterization of Hydrazine Solution Processed Cu12Sb4S13 Film

8.0% Efficient Submicron CuIn(S,Se)2 Solar Cells on Sn:In2O3 Back Contact Via a Facile Solution Process

Coordination Engineering of Cu-Zn-Sn-S Aqueous Precursor for Efficient Kesterite Solar Cells

Cuin(S,Se)(2) Thin Films Prepared from A Novel Thioacetic Acid-Based Solution and Their Photovoltaic Application

8.0% Efficient Submicron CuIn(S,Se) 2 Solar Cells on Sn:In 2 O 3 Back Contact via a Facile Solution Process

Facile synthesis of ultrafine Cu2ZnSnS4 nanocrystals by hydrothermal method for use in solar cells

Facile synthesis of Cu2ZnSnS4 nanocrystals and its use for dye-sensitized solar cells applications

Synthesis and Photoelectrocatalytic Performance of Flower-like Copper Sulfide

Cation Exchange Synthesis of CuS Nanotubes Composed of Nanoparticles As Low-Cost Counter Electrodes for Dye-Sensitized Solar Cells

The synthesis of Cu 2 ZnSnS 4 nanoparticles via an open-air solution route: influences of Zn precursor content

Solution-processed CuSbS 2 Solar Cells Based on Metal–organic Molecular Solution Precursors

Novel solution processing of high-efficiency Earth-abundant Cu2 ZnSn(S,Se)4 solar cells.