Abstract:A method of molecular beam epitaxy deposition combined with in situ oxygen doping is developed to prepare CdS:O films. This method effectively passivates the sulfur vacancies and enhances the [hk1] orientation of antimony selenosulfide (Sb2(S,Se)3), which improves the carrier transport performance and ultimately achieves the improvement of the power conversion efficiency of Sb2(S,Se)3 solar cells. Antimony selenosulfide (Sb2(S,Se)3) is considered as a promising light‐harvesting material and has been widely used in solar cells. For high‐efficiency Sb2(S,Se)3 solar cells, the most commonly used electron‐transporting layer of cadmium sulfide (CdS) is generally prepared by chemical bath deposition (CBD) approach. However, the hazardous waste liquid from the chemical bath and the sensitivity of the deposition process to the environment are challenges to practical applications. Herein, a molecular beam epitaxy deposition is reported to prepare CdS films, overcoming the drawbacks of CBD process. Furthermore, through introducing oxygen during the deposition of CdS, the sulfur vacancy defects generated in the vacuum deposition process are suppressed. The performance of Sb2(S,Se)3 solar cells is accordingly improved significantly. This improvement is attributed to the following aspects: i) the improved optical transmittance of CdS films. ii) The enhanced [hk1] orientation of Sb2(S,Se)3 absorber layer. iii) The improved heterojunction quality and suppressed carrier recombination. As a result, a power conversion efficiency of 8.59% for Sb2(S,Se)3 solar cells is achieved. This study provides a novel strategy for preparing electron‐transporting layers for efficient chalcogenide thin‐film solar cells and sheds new light on large‐area solar cell applications.

A Facile Molecular Precursor-Based Cu(In,Ga)(S,Se)2solar Cell with 8.6% Efficiency

Air‐Stable, Low‐Toxicity Precursors for CuIn(SeS)2 Solar Cells with 10.1 % Efficiency

A Novel and Versatile Strategy to Prepare Metal–Organic Molecular Precursor Solutions and Its Application in Cu(In,Ga)(S,Se)2 Solar Cells

Over 6% Certified Sb2(S,Se)3 Solar Cells Fabricated Via in Situ Hydrothermal Growth and Postselenization

Cuin(S,Se)(2) Thin Films Prepared from A Novel Thioacetic Acid-Based Solution and Their Photovoltaic Application

Over 12% Efficient Low-Bandgap CuIn(S, Se)(2) Solar Cells with the Absorber Processed from Aqueous Metal Complexes Solution in Air

Reactive Close-Spaced Sublimation Processed CuSbSe2 Thin Films and Their Photovoltaic Application

Fabrication of a Cu2ZnSn(S,Se)4 photovoltaic device by a low-toxicity ethanol solution process.

Solution-processed CuSbS 2 Solar Cells Based on Metal–organic Molecular Solution Precursors

A promising photovoltaic material Cu2MnSn(S,Se)4: Film growth and its application in solar cell

8.0% Efficient Submicron CuIn(S,Se) 2 Solar Cells on Sn:In 2 O 3 Back Contact via a Facile Solution Process

Over 10% Efficient CuIn(S,Se)2 Solar Cells Fabricated from Environmentally Benign Solution in Air

Stable and Efficient CdS/Sb2Se3 Solar Cells Prepared by Scalable Close Space Sublimation

Sequential Coevaporation and Deposition of Antimony Selenosulfide Thin Film for Efficient Solar Cells

8.0% Efficient Submicron CuIn(S,Se)2 Solar Cells on Sn:In2O3 Back Contact Via a Facile Solution Process

Hydrazine Hydrate‐Induced Surface Modification of CdS Electron Transport Layer Enables 10.30%‐efficient Sb2(S,Se)3 Planar Solar Cells

Preparation of Cu(In,Ga)Se 2 Thin Film Solar Cells by Selenization of Metallic Precursors in an Ar Atmosphere

Sequential Deposition Route to Efficient Sb2S3 Solar Cells

A Novel Multi‐sulfur Source Collaborative Chemical Bath Deposition Technology Enables 8%‐efficiency Sb2S3 Planar Solar Cells

Molecular Beam Epitaxy Deposition of In Situ O‐Doped CdS Films for Highly Efficient Sb2(S,Se)3 Solar Cells

A Novel Multi-Sulfur Source Collaborative Chemical Bath Deposition Technology Enables 8%-Efficiency Sb2 S3 Planar Solar Cells.