Abstract:A method of molecular beam epitaxy deposition combined with in situ oxygen doping is developed to prepare CdS:O films. This method effectively passivates the sulfur vacancies and enhances the [hk1] orientation of antimony selenosulfide (Sb2(S,Se)3), which improves the carrier transport performance and ultimately achieves the improvement of the power conversion efficiency of Sb2(S,Se)3 solar cells. Antimony selenosulfide (Sb2(S,Se)3) is considered as a promising light‐harvesting material and has been widely used in solar cells. For high‐efficiency Sb2(S,Se)3 solar cells, the most commonly used electron‐transporting layer of cadmium sulfide (CdS) is generally prepared by chemical bath deposition (CBD) approach. However, the hazardous waste liquid from the chemical bath and the sensitivity of the deposition process to the environment are challenges to practical applications. Herein, a molecular beam epitaxy deposition is reported to prepare CdS films, overcoming the drawbacks of CBD process. Furthermore, through introducing oxygen during the deposition of CdS, the sulfur vacancy defects generated in the vacuum deposition process are suppressed. The performance of Sb2(S,Se)3 solar cells is accordingly improved significantly. This improvement is attributed to the following aspects: i) the improved optical transmittance of CdS films. ii) The enhanced [hk1] orientation of Sb2(S,Se)3 absorber layer. iii) The improved heterojunction quality and suppressed carrier recombination. As a result, a power conversion efficiency of 8.59% for Sb2(S,Se)3 solar cells is achieved. This study provides a novel strategy for preparing electron‐transporting layers for efficient chalcogenide thin‐film solar cells and sheds new light on large‐area solar cell applications.

A Novel and Versatile Strategy to Prepare Metal–Organic Molecular Precursor Solutions and Its Application in Cu(In,Ga)(S,Se)2 Solar Cells

A Facile Molecular Precursor-Based Cu(In,Ga)(S,Se)2solar Cell with 8.6% Efficiency

Air‐Stable, Low‐Toxicity Precursors for CuIn(SeS)2 Solar Cells with 10.1 % Efficiency

Fabrication of a Cu2ZnSn(S,Se)4 photovoltaic device by a low-toxicity ethanol solution process.

Chemical synthesis of Cu(In) metal inks to prepare CuInS2 thin films and solar cells

Metal Precursor with Bi-Layer Indium for Cu(In,Ga)Se2 Thin Film Preparation

Coordination Engineering of Cu-Zn-Sn-S Aqueous Precursor for Efficient Kesterite Solar Cells

Solution-processed CuSbS 2 Solar Cells Based on Metal–organic Molecular Solution Precursors

Cu–In Intermetallic Compound Inks for CuInS 2 Solar Cells

Non‐Hydrazine Solutions in Processing CuIn(S,Se)2 Photovoltaic Devices from Hydrazinium Precursors

Novel solution processing of high-efficiency Earth-abundant Cu2 ZnSn(S,Se)4 solar cells.

Cuin(S,Se)(2) Thin Films Prepared from A Novel Thioacetic Acid-Based Solution and Their Photovoltaic Application

An Efficient S and Se Co-Annealing Strategy for Performance Enhancement of Solution-Processed Submicron CuIn(S,Se)2 Solar Cells

Reactive Close-Spaced Sublimation Processed CuSbSe2 Thin Films and Their Photovoltaic Application

A Novel Strategy for Preparation of Cu2(MII)(MIV)S4 Thin Films for Solar Cell: Sulfurization of Mixed Metal Oxides Precursor Synthesized by Combustion Method

Molecular Beam Epitaxy Deposition of In Situ O‐Doped CdS Films for Highly Efficient Sb2(S,Se)3 Solar Cells

Preparation and Optimization of All-Inorganic CdSe/ZnTe Solar Cells

Benign Solutions and Innovative Sequential Annealing Processes for High Performance Cu2ZnSn(Se,S)4 Photovoltaics

Sb2Se3 solar cells employing metal-organic solution coated CdS buffer layer

A Novel Strategy for Preparation of Cu<sub>2</sub>(M<sup>II</sup>)(M<sup>IV</sup>)S<sub>4</sub> Thin Films for Solar Cell: Sulfurization of Mixed Metal Oxides Precursor Synthesized by Combustion Method

Colloidal synthesis of zincblende Cu3InSnS5 nanocrystals and their application in the thin-film solar cell