Abstract:Abstract Rare-earth disilicates are promising candidates for thermal and environmental barrier coatings (TEBC) in gas turbines that safeguard SiC f /SiC ceramic matrix composites (CMCs) from thermal degradation and environmental attacks. Here, we report a systematic investigation on novel TEBC material, γ-Y 1.5 Yb 0.5 Si 2 O 7 . The γ-phase quarter molar ytterbium–doped yttrium disilicate exhibited low thermal conductivity (1.72 W·m −1 ·K −1 at 1200 °C) and reduced intrinsic thermal expansion (3.17 ± 0.22 × 10 −6 K −1 up to 1000 °C), ensuring promisingly effective thermal insulation and minimized thermal stress with CMC substrates. Using density functional theory (DFT), the heat capacity of γ-Y 1.5 Yb 0.5 Si 2 O 7 was predicted higher than that of undoped γ-Y 2 Si 2 O 7 . Comparing these predictions to results calculated using the Neumann–Kopp (NK) rule revealed only minor variations. A metastable CMAS interaction byproduct, cyclosilicate phase Ca 3 RE 2 (Si 3 O 9 ) 2 , was identified based on energy dispersive X-ray spectrometer (EDS) and electron backscatter diffraction (EBSD) techniques, appearing at 1300 °C but disappearing at 1400 °C. The γ-Y 1.5 Yb 0.5 Si 2 O 7 exhibited good CMAS resistance on both dense pellets and sprayed coatings, forming a protective apatite (Ca 2 RE 8 (SiO 4 ) 6 O 2 ) interlayer that effectively hindered CMAS infiltration at evaluated temperatures. The relatively higher Y:Yb atomic ratio (> 3) in the apatite grains indicate differential reactivity with molten CMAS and provides crucial insights into the CMAS corrosion mechanism. These findings highlight the potential of γ-Y 1.5 Yb 0.5 Si 2 O 7 as a CMC coating material, emphasizing the need for tailored microstructural optimization as a thermal sprayed coating to enhance long-term performance in extreme gas turbine environments.

High-temperature interface stability of tri-layer thermal environmental barrier coatings

Oxidation behavior and interface evolution of tri-layer Si/Yb2SiO5/LaMgAl11O19 thermal and environmental barrier coatings under isothermal heat treatment at 1300 °C

Rear Earth Oxide Multilayer Deposited by Plasma Spray-Physical Vapor Deposition for Envisaged Application as Thermal/Environmental Barrier Coating

Nanostructured Yb2SiO5/mullite-SiC/Si Environmental Barrier Coating with Long-Term Stability at 1250 °C

Thermal shock resistance and bonding strength of tri-layer Yb2SiO5/mullite/Si coating on SiCf/SiC composites

Preparation and High-Temperature Performance of Sc2O3-Y2O3 Co-Stabilized ZrO2 Thermal Barrier Coatings

Thermochemical compatibility between La2(Ce1-xZrx)2O7 and 4 mol% Y2O3 stabilized zirconia after high temperature heat treatment

Thermal durability of ytterbium silicate environmental barrier coating prepared by suspension plasma spray

Thermal cycling and steam corrosion behavior of Yb3Al5O12‐based multilayered environmental barrier coatings for SiCf/SiC

Oxidation resistance and thermal shock behavior of tri-layer Si/Si–Yb2SiO5/Yb2SiO5–SiC environmental barrier coatings at 1300 °C

Thermal cycling of EB-PVD TBCs based on YSZ ceramic coat and diffusion aluminide bond coat

Thermochemical Stability of Yb 2 Si 2 O 7 Environmental Barrier Coatings During Thermal Cycling and Water Vapor Corrosion at 1350 °C

Thermal and mechanical properties of Sc2O3–CeO2 co-stabilized zirconia ceramic as promising thermal barrier coating material

High-temperature performance of thermal environmental barrier coatings in 90%H2O-10%O2 conditions at 1475 °C

Preparation of 8YSZ and double-ceramic-layer La2Zr2O7/8YSZ thermal barrier coatings on GH4169 superalloy substrates and their static high temperature oxidation behaviour

Thermal cycle and water oxygen performance of multi-layered Y3Al5O12/Yb2SiO5/Yb2Si2O7 thermal/environmental barrier coatings

Thermal properties and calcium-magnesium-alumino-silicate (CMAS) interaction of novel γ-phase ytterbium-doped yttrium disilicate (γ-Y1.5Yb0.5Si2O7) environmental barrier coating material

Properties evaluation and failure behaviour of plasma sprayed Y4Hf3O12 for thermal barrier coating applications

Effect of Sc2O3 Doping on YSZ TBCs: Morphologies, Phase Composition, Mechanical Properties, and High-Temperature Oxidation Resistance

Influence of post heat treatment on the high-temperature performances of multi-layered thermal/environmental barrier coatings on SiC-based composites

Thermochemical compatibility between La<sub>2</sub>(Ce<sub>1-x</sub>Zr<sub>x</sub>)<sub>2</sub>O<sub>7</sub> and 4 mol% Y<sub>2</sub>O<sub>3</sub> stabilized zirconia after high temperature heat treatment