Abstract:Hybrid plasma spraying combines plasma spraying of dry coarse powders and liquids (suspensions or solutions) potentially providing high deposition rates and coatings with novel microstructures and amended functionality. Such composites may be potentially interesting also for the thermal barrier coatings (TBCs). In this study, the first experimental TBCs with hybrid ceramic top-coats were deposited by hybrid water-/argon-stabilized plasma (WSP-H) technology. Coarse dry YSZ (yttria-stabilized zirconia: ZrO 2 -Y 2 O 3 ) powder was selected to form the top-coat matrix. Suspensions of YSZ, Al 2 O 3 (alumina), YAG (yttrium aluminum garnet: Y 3 Al 5 O 12 ), or GZO (gadolinium zirconate: Gd 2 Zr 2 O 7 ) were the source of the additional miniature phase. Uniform functionalized coatings with TBC-relevant thickness and microstructure were successfully deposited. Hybrid and reference coatings deposited also with WSP-H torch and with YSZ feedstocks showed comparable thermal diffusivity regardless of the spraying conditions but the addition of Al 2 O 3 and YAG increased it by ~ 65%, whereas GZO decreased it by ~ 20%. Thermal cycling resistance of the coatings was evaluated by thermal cycling fatigue (TCF) test. Hybrid coating with the addition of YSZ miniature phase endured on average 640 TCF cycles, which was 250-300 cycles less than the reference YSZ coatings deposited without liquid feedstocks but still comparable to the currently used YSZ-based industrial TBCs. Coatings with dissimilar chemistry of additional miniature splats showed inferior mean TCF lifetimes: GZO 438 cycles, Al 2 O 3 272 cycles, and YAG 173 cycles, opening space for further coating optimization. All hybrid coatings failed above the bond-coat/top-coat interface. Comparison of coatings before and after the thermal exposure by scanning electron microscopy (SEM) and x-ray diffraction (XRD) revealed possible changes within the coating microstructure, namely sintering (typical for top-coat consisting only of YSZ), conversion of metastable and amorphous phase (top-coats with the addition of Al 2 O 3 and YAG) or interaction between the matrix and secondary phase (top-coat with the addition of GZO).

Plasma sprayed 18mol% YO1.5 stabilized hafnia as potential thermal barrier coating

Plasma sprayed Yb4Hf3O12 thermal barrier coatings with excellent thermophysical properties and robust CMAS corrosion resistance

Properties evaluation and failure behaviour of plasma sprayed Y4Hf3O12 for thermal barrier coating applications

Evolution mechanism of the microstructure and mechanical properties of plasma-sprayed yttria-stabilized hafnia thermal barrier coating at 1400 °C

Thermophysical properties and cyclic lifetime of plasma sprayed SrAl 12 O 19 for thermal barrier coating applications

Phase transformation and thermal conductivity of the APS Y2O3 doped HfO2 coating with hybrid structure

Internal Diameter Atmospheric-Plasma-Sprayed High-Performance YSZ-Based Thermal Barrier Coatings

Thermo-physical properties and ferroelastic toughening of non-transformable t’-yttria-stabilized hafnia-zirconia solid solution

High Temperature Thermal Properties of Columnar Yttria Stabilized Zirconia Thermal Barrier Coating Performed by Suspension Plasma Spraying

CMAS Corrosion Resistance of Plasma-Sprayed YSZ and Yb2O3-Y2O3-Co-Stabilized ZrO2 Coatings under 39–40 KW Spraying Power

Thermal shock performance and failure behavior of Zr6Ta2O17-8YSZ double-ceramic-layer thermal barrier coatings prepared by atmospheric plasma spraying

Tailoring the initial characterization of fully stabilized HfO2 with Y2O3/Ta2O5

Microstructure and Thermal Properties of the Early-Stage Experimental Thermal Barrier Coatings Deposited by Hybrid Plasma Spraying

Thermal Stability of Plasma-Sprayed Thick Thermal Barrier Coatings Using Triplex ProTM-200 Torch

Thermal durability of ytterbium silicate environmental barrier coating prepared by suspension plasma spray

Al 2 O 3 –TiO 2 Codoped Yttria‐Stabilized Zirconia Thermal Barrier Coatings Resistant to Damage by Molten Calcium‐Magnesium‐Alumino‐Silicate (CMAS) Glass

Fast synthesis of novel micron porous particles of Gd, Yb and Y-stabilized zirconia to prepare TBCs with low thermal conductivity

Rear Earth Oxide Multilayer Deposited by Plasma Spray-Physical Vapor Deposition for Envisaged Application as Thermal/Environmental Barrier Coating

On the oxygen vacancy annealing in air plasma sprayed YSZ thermal barrier coatings

Deposition Characteristics, Sintering and Cmas Corrosion Resistance, and Mechanical Properties of Thermal Barrier Coatings by Atmospheric Plasma Spraying

Low Thermal Conductivity Yttrium Aluminum Garnet Thermal Barrier Coatings Made by the Solution Precursor Plasma Spray: Part I—Processing and Properties