Abstract:Spherical Gd2Zr2O7 hollow powders with a mean size of 8.8 μm were fabricated as feedstock for thermal barrier coatings (TBCs) by spray-drying. The single-ceramic-layer (SCL) Gd2Zr2O7 TBCs and double-ceramic-layer (DCL) Gd2Zr2O7/YSZ TBCs with quasi-columnar structure were successfully fabricated by plasma spray-physical vapor deposition (PS-PVD). Tensile and water-quenching tests were applied to evaluate TBCs performances. The results show that adhesion strength of SCL Gd2Zr2O7 TBCs and DCL Gd2Zr2O7/YSZ TBCs is 36.5 MPa and 15.4 MPa, respectively. The delamination of SCL Gd2Zr2O7 TBCs and DCL Gd2Zr2O7/YSZ TBCs in the tensile test takes place at the middle and bottom of Gd2Zr2O7 layer, respectively, due to relatively lower fracture toughness of Gd2Zr2O7 layer. After 40 cycles of water-quenching test, DCL Gd2Zr2O7/YSZ TBC surface keeps relatively intact, while SCL Gd2Zr2O7 TBC surface shows 20% visible destroyed regions, which demonstrates that DCL Gd2Zr2O7/YSZ TBCs have a better thermal shock resistance than SCL Gd2Zr2O7 TBCs. The cracks in the SCL system propagate near thermally grown oxide (TGO) due to thermal mismatch and TGO growing stress, while cracks in the DCL system propagate in the Gd2Zr2O7 layer due to its relatively lower fracture toughness.

Fast synthesis of novel micron porous particles of Gd, Yb and Y-stabilized zirconia to prepare TBCs with low thermal conductivity

Low Thermal Conductivity Yttrium Aluminum Garnet Thermal Barrier Coatings Made by the Solution Precursor Plasma Spray: Part I—Processing and Properties

Phase Composition and Stability, Sintering and Thermal Conductivity of Gd2O3 and Yb2O3 Co-Doped YSZ

Formation Mechanism of an Ultra-Low Thermal Conductivity Thermal Barrier Coating Deposited Using Biomimetic Hierarchical Porous Microspheres

High Temperature Thermal Properties of Columnar Yttria Stabilized Zirconia Thermal Barrier Coating Performed by Suspension Plasma Spraying

A comparison between novel Gd2Zr2O7 and Gd2Zr2O7/YSZ thermal barrier coatings fabricated by plasma spray-physical vapor deposition

Synthesis of Gadolinium Zirconate by Coprecipitaiton and Its Properties for TBC Application

Microstructure and Thermal Properties of the Early-Stage Experimental Thermal Barrier Coatings Deposited by Hybrid Plasma Spraying

Preparation and sintering behavior of GdYb-YSZ nanostructured thermal barrier coating

Plasma sprayed 18mol% YO1.5 stabilized hafnia as potential thermal barrier coating

Low Thermal Conductivity Yttrium Aluminum Garnet Thermal Barrier Coatings Made by the Solution Precursor Plasma Spray: Part II—Planar Pore Formation and CMAS Resistance

High‐Temperature Aging of Plasma Sprayed Quasi‐Eutectoid LaYbZr2O7–Part II: Microstructure & Thermal Conductivity

Internal Diameter Atmospheric-Plasma-Sprayed High-Performance YSZ-Based Thermal Barrier Coatings

Tailoring the thermal conductivity of Sc2O3–Yb2O3 Co-stabilized ZrO2 thermal barrier materials and mechanism insight

Optimization of Yb2O3-Gd2O3-Y2O3 Co-Doped ZrO2 Agglomerated and Calcined Powders for Air Plasma Spraying

In-situ Synthesis of Gadolinium Niobate Quasi-Binary Composites with Balanced Mechanical and Thermal Properties for Thermal Barrier Coatings

Effect of Sc2O3 Doping on YSZ TBCs: Morphologies, Phase Composition, Mechanical Properties, and High-Temperature Oxidation Resistance

Thermal Stability of Plasma-Sprayed Thick Thermal Barrier Coatings Using Triplex ProTM-200 Torch

Investigation of Thermal Shock Behavior of Multilayer Thermal Barrier Coatings with Superior Erosion Resistance Prepared by Atmospheric Plasma Spraying

Multilayer GZ/YSZ Thermal Barrier Coating from Suspension and Solution Precursor Plasma Spray

Enhanced thermal radiation blocking of plasma spraying thermal barrier coatings with a bimodal splat thickness distribution