Abstract:CsPbIBr 2 perovskite has been considered as a promising candidate for the light-harvesting material of perovskite solar cells (PSCs) due to its acceptable band gap and high stability. Nevertheless, the efficiency of CsPbIBr 2 -based PSC still lags behind that of its homologs and is far away from the theoretical value. This can be attributed to the poor quality of CsPbIBr 2 perovskite film. Therefore, it is highly desirable to improve the quality of CsPbIBr 2 perovskite film for enhancing the photovoltaic performance of CsPbIBr 2 PSCs. In this work, cellulose acetate (CA) is used as a polymer additive that is introduced into CsPbIBr 2 precursor solution for improving the quality of CsPbIBr 2 perovskite film via controlling crystallization process. The interaction between the C=O group of CA and Pb 2+ in the precursor solution and the enhanced viscosity of precursor solution induced by CA addition reduce the crystallization rate of CsPbIBr 2 perovskite. As a result, a compact CsPbIBr 2 perovskite film with high crystallinity, large grain size, and low density of defect is prepared. The remarkably improved quality of CsPbIBr 2 perovskite film upon CA addition can be attributed to the relatively slow crystallization rate. The slow crystallization rate allows the perovskite film to have enough time to form perfect perovskite crystal structure with large-size crystal grain and low density of defects. Furthermore, the oxygen functional groups of CA can passivate the undercoordinated Pb 2+ , which effectively suppresses the defects and traps induced by Pb 2+ in CsPbIBr 2 perovskite film. The stability of CsPbIBr 2 perovskite film is also greatly improved by CA addition. The added CA does not participate into the CsPbIBr 2 perovskite crystal but distributes at the grain boundaries and, or, interfaces area and forms a moisture barrier around perovskite grains, which obviously enhances the stability of CsPbIBr 2 perovskite film in the ambient air. The carbon-based CsPbIBr 2 perovskite solar cells with a configuration of FTO/TiO 2 /perovskite film/ carbon are fabricated by using the carbon layer as both the hole-transport layer and the back electrode. Under the illumination of 100 mW/cm 2 , the PSC based on CA-CsPbIBr 2 perovskite film delivers a high conversion efficiency of 7.52%, which is increased by 40% compared with the efficiency of the device based on the pure CsPbIBr 2 perovskite film. In addition, the PSC based on CA-CsPbIBr 2 perovskite film shows a hysteresis index (HI) of 7%, while the device based on pure CsPbIBr 2 film displays a higher HI of 22%. This result demonstrates that the CA addition can effectively suppress the hysteresis effect of inorganic PSCs. The stability of the PSC based on CA-CsPbIBr 2 perovskite film is investigated by tracking the variation of the efficiency with time in the ambient condition. The fabricated PSCs without any encapsulation are stored in the air. The photovoltaic performance is measured once a day. The efficiency of the PSC based on CA-CsPbIBr 2 perovskite remains more than 90% of its initial value after being stored in the air for 800 h, showing an excellent long-term stability. Therefore, this work provides a facile and effective method of improving the quality of CsPbIBr 2 perovskite films, which is expected to be helpful in developing high-efficiency and stable carbon-based inorganic PSCs.

Guanidinium Thiocyanate Additive Engineering for High-Performance CsPbIBr 2 Solar Cells with an Efficiency of 10.90%

Guanidinium iodide modification enabled highly efficient and stable all-inorganic CsPbBr3 perovskite solar cells

First Investigation of Additive Engineering for Highly Efficient Cs2AgBiBr6-based Lead-Free Inorganic Perovskite Solar Cells

A Bifunctional Carbazide Additive For Durable CSSNI3 Perovskite Solar Cells

High‐Efficiency Carbon‐based CsPbI2Br Perovskite Solar Cells from Dual Direction Thermal Diffusion Treatment with Cadmium Halides

A Mixed Antisolvent-Assisted Crystallization Strategy for Efficient All-Inorganic CsPbIBr 2 Perovskite Solar Cells by a Low-Temperature Process

Tailoring of CsPbIBr2 Perovskite Crystallization Via Phenylthiourea for Stable and Efficiency Perovskite Solar Cells

Enhancing Quality of CsPbIBr2 Inorganic Perovskite Via Cellulose Acetate Addition for High-Performance Perovskite Solar Cells

Gadolinium-incorporated CsPbI2Br for boosting efficiency and long-term stability of all-inorganic perovskite solar cells

Secondary Crystallization Strategy for Highly Efficient Inorganic CsPbI2Br Perovskite Solar Cells with Efficiency Approaching 17％

Zinc and Acetate Co-doping for Stable Carbon-Based CsPbIBr 2 Solar Cells with Efficiency over 10.6%

Carbon-Based Stable CsPbIBr 2 Solar Cells with Efficiency of over 10% from Bifunctional Quinoline Sulfate Modification

Stiffening the Pb-X Framework through a π-Conjugated Small-Molecule Cross-Linker for High-Performance Inorganic CsPbI 2 Br Perovskite Solar Cells

n-type absorber by Cd2+ doping achieves high-performance carbon-based CsPbIBr2 perovskite solar cells

High-Efficiency And Thermal/Moisture Stable Cspbi2.84br0.16 Inorganic Perovskite Solar Cells Enabled By A Multifunctional Cesium Trimethylacetate Organic Additive

Photovoltaic Performance Improvement of All‐Inorganic CsPbBr3 Perovskite Solar Cells by Antisolvent Assisted Crystallization

Multifunctional Molecule Modification toward Efficient Carbon‐Based All‐Inorganic CsPbIBr 2 Perovskite Solar Cells

A Solution-Processed Dopant-Free Tin Phthalocyanine (SnPc) Hole Transport Layer for Efficient and Stable Carbon-Based CsPbI 2 Br Planar Perovskite Solar Cells Prepared by a Low-Temperature Process

An Extraordinary Antisolvent Ethyl Cyanoformate for Achieving High Efficiency and Stability P3HT‐Based CsPbI3 Perovskite Solar Cells

Highly Crystalline CsPbI2Br Films for Efficient Perovskite Solar Cells Via Compositional Engineering

Adjustable Skeleton of Bilateral Lewis Base Passivator for CsPbI 3 Perovskite Solar Cells with PCE over 20% and Superior Stability