Carbon-Based Stable CsPbIBr 2 Solar Cells with Efficiency of over 10% from Bifunctional Quinoline Sulfate Modification

Deng Wang,Wenjing Li,Xuping Liu,Guodong Li,Lei Zhang,Ruoshui Li,Weihai Sun,Jihuai Wu,Zhang Lan
DOI: https://doi.org/10.1021/acsaem.1c00575
IF: 6.4
2021-06-08
ACS Applied Energy Materials
Abstract:The mixed-halide CsPbIBr<sub>2</sub> all-inorganic perovskite solar cells (PSCs) have attracted widespread attention in view of their excellent stability and suitable band gap. However, the inherent high traps in perovskite films lead to serious nonradiative recombination and limit their future development. In this study, a passivation strategy is proposed to prepare CsPbIBr<sub>2</sub> PSC with high efficiency, excellent long-term stability, and low hysteresis, which uses the in situ formed PbSO<sub>4</sub> protective layer and the passivation of undercoordinated Pb<sup>2+</sup> defects by introducing quinoline sulfate (QS). Due to the effective passivation, the QS-passivated CsPbIBr<sub>2</sub> film with a larger grain size exhibits a better humidity resistance compared with the control one. The champion power conversion efficiency (PCE) of the carbon-based PSC without a hole transporter reaches 10.41% with an open-circuit voltage (<i>V</i><sub>OC</sub>) of 1.298 V. Especially, it can retain over 98% of the primeval PCE after nearly 1000 h of aging in the ambient atmosphere. Therefore, our work may promote the application of all-inorganic PSC in commercial development.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00575?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00575</a>.Experimental section includes materials, fabrication of solar cells, and characterization. UPS spectra of CsPbIBr<sub>2</sub> and CsPbIBr<sub>2</sub>/QS films, AFM images of CsPbIBr<sub>2</sub> and CsPbIBr<sub>2</sub>/QS films, and photovoltaic performance of the PSCs (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00575/suppl_file/ae1c00575_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,chemistry, physical,energy & fuels
What problem does this paper attempt to address?
This paper aims to solve the inherent high defect density problems in mixed - halide all - inorganic perovskite solar cells (CsPbIBr₂ PSCs), which lead to severe non - radiative recombination phenomena and limit the performance and long - term stability of the devices. Specifically, the researchers proposed a surface passivation strategy. By introducing quinoline sulfate (QS), an inorganic lead sulfate protective layer is formed in - situ on the surface of the perovskite film, and the uncoordinated Pb²⁺ ions are passivated by sulfate ions and quinoline groups, thereby improving the photoelectric conversion efficiency of the device, reducing the hysteresis effect and enhancing the long - term stability. The main research achievements include: - The fabricated CsPbIBr₂ PSCs achieved a maximum power conversion efficiency (PCE) of 10.41% and an open - circuit voltage (VOC) of 1.298 V without a hole - transport layer. - After nearly 1,000 hours of aging tests, the device can still maintain more than 98% of its initial PCE. - Compared with the untreated CsPbIBr₂ films, the QS - treated films exhibit better humidity - resistance performance, which is attributed to the formed inorganic lead sulfate passivation protective layer and the modification effect of the hydrophobic quinoline groups. These results indicate that by using quinoline sulfate as a passivating agent, the performance and stability of all - inorganic perovskite solar cells can be effectively improved, promoting the development of such devices in commercial applications.