Abstract:Using additives to adjust the morphology of perovskite films is an effective method to improve the power conversion efficiency (PCE) and long-term stability of CsPbIBr2 perovskite solar cells (PSCs). In this work, CsPbIBr2 films are modified with the guanidinium thiocyanate (GuaSCN) additive. After adding GuaSCN into the precursor of perovskite, the crystal quality of the resulted perovskite films improved, and the orientations of the (100) and (200) crystal planes are enhanced obviously. The energy level alignment is optimized, which is beneficial to the extraction of electrons. Moreover, the defect density is reduced, and the charge recombination process is effectively suppressed, thereby improving the solar cell efficiency and stability. GuaSCN is absent from the resulted perovskite film due to the high-temperature annealing. Consequently, based on the GuaSCN additive with a 3% molar ratio in the perovskite precursor solution, the device yields a champion PCE of 10.90%, with an open-circuit voltage of 1.23 V, a short-circuit current of 12.05 mA/cm2, and a fill factor of 73.71%, which is 18.7% higher than that of the counterpart without GuaSCN. The improved CsPbIBr2 PSC shows better stability. The PCE retains ∼95% of its initial value compared to only ∼64% for pristine PSCs after being stored for over 600 h without encapsulation in air. This work provides a facile strategy for reducing defects and improving the performance of all-inorganic PSCs.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c03733.Experimental details; Tauc plots of the CPIB and CPIB-0.03 films; lifetime parameters derived from the TRPL spectroscopy; detailed photovoltaic parameters; J–V curves under reverse and forward scan directions; a brief summary of the photovoltaic parameters in high-efficiency CsPbIBr2 PSCs; EIS parameters; XPS spectra of Cs 3d, Pb 4f, I 3d, and Br 3d in the CPIB and CPIB-0.03 films; and photographs of the CPIB and CPIB-0.03 films at 20 °C, 50% RH (PDF)This article has not yet been cited by other publications.

First Investigation of Additive Engineering for Highly Efficient Cs2AgBiBr6-based Lead-Free Inorganic Perovskite Solar Cells

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Simultaneous Power Conversion Efficiency and Stability Enhancement of Cs2AgBiBr6 Lead‐Free Inorganic Perovskite Solar Cell Through Adopting a Multifunctional Dye Interlayer

Carbon Quantum Dot Additive Engineering for Efficient and Stable Carbon-Based Perovskite Solar Cells

Fundamental Understanding in the Performance-Limiting Factors of Cs2AgBiBr6-based Perovskite Photovoltaics

Recent Advances in Cs2AgBiBr6-Based Halide Double Perovskites As Lead-Free and Inorganic Light Absorbers for Perovskite Solar Cells

Guanidinium iodide modification enabled highly efficient and stable all-inorganic CsPbBr3 perovskite solar cells

Organic Additive Engineering to Grow High‐Quality Inorganic CsPbX3 Perovskite Films for Efficient and Stable Solar Cells

Additive Engineering by Bifunctional Guanidine Sulfamate for Highly Efficient and Stable Perovskites Solar Cells

Passivating A-Site and X-Site Vacancies Simultaneously Via N-Heterocyclic Amines for Efficient Cs2AgBiBr6 Solar Cells.

Guanidinium Thiocyanate Additive Engineering for High-Performance CsPbIBr 2 Solar Cells with an Efficiency of 10.90%

Thiourea with sulfur-donor as an effective additive for enhanced performance of lead-free double perovskite photovoltaic cells

A Bifunctional Carbazide Additive For Durable CSSNI3 Perovskite Solar Cells

Additive Engineering by 6-Aminoquinoline Monohydrochloride for High-Performance Perovskite Solar Cells

Intermediate‐Adduct‐Assisted Growth of Stable CsPbI 2 Br Inorganic Perovskite Films for High‐Efficiency Semitransparent Solar Cells

Phase transition induced recrystallization and low surface potential barrier leading to 10.91%-efficient CsPbBr3 perovskite solar cells

Additive Engineering by Dicyandiamide for High-Performance Carbon-based Inorganic Perovskite Solar Cells

Multifunctional Molecule Modification toward Efficient Carbon‐Based All‐Inorganic CsPbIBr 2 Perovskite Solar Cells

Optimizing the working mechanism of the CsPbBr3-based inorganic perovskite solar cells for enhanced efficiency

Multistrategy Toward Highly Efficient and Stable CsPbI 2 Br Perovskite Solar Cells Based on Dopant‐Free Poly(3‐Hexylthiophene)

Efficient and stable carbon‐based all‐inorganic CsPbIBr2 perovskite solar cells obtained via treatment by biological active substance additive