Abstract:In bridge structure monitoring and evaluation, deformation data serve as a crucial basis for assessing structural conditions. Different from discrete monitoring points, spatially continuous deformation modes provide a comprehensive understanding of deformation and potential information. Terrestrial laser scanning (TLS) is a three-dimensional deformation monitoring technique that has gained wide attention in recent years, demonstrating its potential in capturing structural deformation models. In this study, a TLS-based bridge deformation mode monitoring method is proposed, and a deformation mode calculation method combining sliding windows and surface fitting is developed, which is called the SWSF method for short. On the basis of the general characteristics of bridge structures, a deformation error model is established for the SWSF method, with a detailed quantitative analysis of each error component. The analysis results show that the deformation monitoring error of the SWSF method consists of four parts, which are related to the selection of the fitting function, the density of point clouds, the noise of point clouds, and the registration accuracy of point clouds. The error caused by point cloud noise is the main error component. Under the condition that the noise level of point clouds is determined, the calculation error of the SWSF method can be significantly reduced by increasing the number of points of point clouds in the sliding window. Then, deformation testing experiments were conducted under different measurement distances, proving that the proposed SWSF method can achieve a deformation monitoring accuracy of up to 0.1 mm. Finally, the proposed deformation mode monitoring method based on TLS and SWSF was tested on a railway bridge with a span of 65 m. The test results showed that in comparison with the commonly used total station method, the proposed method does not require any preset reflective markers, thereby improving the deformation monitoring accuracy from millimeter level to submillimeter level and transforming the discrete measurement point data form into spatially continuous deformation modes. Overall, this study introduces a new method for accurate deformation monitoring of bridges, demonstrating the significant potential for its application in health monitoring and damage diagnosis of bridge structures.

Measurement of Long-Term Periodic and Dynamic Deflection of the Long-Span Railway Bridge Using Microwave Interferometry

Dynamic Monitoring and Data Analysis of a Long-Span Arch Bridge Based on High-Rate GNSS-RTK Measurement Combining CF-CEEMD Method

Radar-based multipoint displacement measurements of a 1200-m-long suspension bridge

A Vision-Based System for Dynamic Displacement Measurement of Long-Span Bridges: Algorithm and Verification

Condition Monitoring and Quantitative Evaluation of Railway Bridge Substructures Using Vehicle-Induced Vibration Responses by Sparse Measurement

Bridge Monitoring Strategies for Sustainable Development with Microwave Radar Interferometry

Rapid and Precise Measurement Method for Track Static Geometry of Large-Span Bridge Railway

Dynamic Deformation Measurement of Bridge Structure Based on GB-MIMO Radar

Measurement Refinements of Ground-Based Radar Interferometry in Bridge Load Test Monitoring: Comprehensive Analysis on a Multi-Span Cable-Stayed Bridge

Multi-Point Displacement Monitoring of Bridges Using A Vision-Based Approach

Measuring Total Transverse Reference-free Displacements of Railroad Bridges using 2 Degrees of Freedom (2DOF): Experimental Validation

Full-Field Bridge Deflection Monitoring with Off-Axis Digital Image Correlation

High-Precision Monitoring Method for Bridge Deformation Measurement and Error analysis Based on Terrestrial Laser Scanning

A remote deflection detection method for long-span bridges using adaptive mask and high-resolution camera

Noncontact deflection measurement for bridge through a multi‐UAVs system

Non-contact measurement method of bridge deflection based on machine vision

Non-contact measurement of the dynamic displacement of railway bridges using an advanced video-based system

Cable force estimation of a long‐span cable‐stayed bridge with microwave interferometric radar

Vortex‐induced vibration measurement of a long‐span suspension bridge through noncontact sensing strategies

Continuous vertical Wheel-rail force Reconstruction method based on the distributed Acoustic sensing technology

Long-Term Structural Health Monitoring System for a High-Speed Railway Bridge Structure