Abstract:Coupling effects of various loading conditions can cause deflections, settlements and even failure of in-service bridges. Although it is one of the most critical loads, unfortunately, loading conditions of moving vehicles are difficult to capture in real time by bridge monitoring systems currently in place for sustainable operation. To fully understand the status of a bridge, it is essential to obtain instantaneous vehicle load distributions in a dynamic traffic environment. Although there are some methods that can identify overweight vehicles, the captured vehicle-related information is scattered and incomplete and thus cannot support effective bridge structural health monitoring (BSHM). This study proposes a noncontact, vision-based approach to identification of vehicle loads for real-time monitoring of bridge structural health. The proposed method consists of four major steps: (1) establish a dual-object detection model for vehicles using YOLOv7, (2) develop a hybrid coordinate transformation model on a bridge desk, (3) develop a multiobject tracking model for real-time trajectory monitoring of moving vehicles, and (4) establish a decision-level fusion model for fusing data on vehicle loads and positions. The proposed method effectively visualizes the 3D spatiotemporal vehicular-load distribution with low delay at a speed of over 30FPS. The results show that the hybrid coordinate transformation ensures that the vehicle position error is within 1 m, a 5-fold reduction compared with the traditional method. Wheelbase is calculated through dual-object detection and transformation and is as the primary reference for vehicle position correction. The trajectory and real-time speed of vehicles are preserved, and the smoothed speed error is under 5.7%, compared with the speed measured by sensors. The authors envision that the proposed method could constitute a new approach for conducting real-time SHM of in-service bridges.

Non-contact measurement method of bridge deflection based on machine vision

Multi-Point Displacement Monitoring of Bridges Using A Vision-Based Approach

A Vision-Based System for Dynamic Displacement Measurement of Long-Span Bridges: Algorithm and Verification

Full-Field Bridge Deflection Monitoring with Off-Axis Digital Image Correlation

Noncontact deflection measurement for bridge through a multi‐UAVs system

A New Non- touch Type Testing Way to Bridge Deflection and Deformation

A remote deflection detection method for long-span bridges using adaptive mask and high-resolution camera

Noncontact structural dynamic characteristics identification method and its test verification

Identification of Structural Dynamic Characteristics Based on Machine Vision Technology

Non-contact measurement method of beam vibration with laser stripe tracking based on tilt photography

Computer Vision-Based Pier Settlement Displacement Measurement of a Multispan Continuous Concrete Highway Bridge under Complex Construction Environments

An image-based bridge displacement field measurement method with self-vibration elimination

Bridge Vibration Measurements Using Different Camera Placements and Techniques of Computer Vision and Deep Learning

Vision-based multi-point real-time monitoring of dynamic displacement of large-span cable-stayed bridges

Application Research of the Laser and Digital Image Processing in Bridge Monitoring.

Image-Based Structural Dynamic Displacement Measurement Using Different Multi-Object Tracking Algorithms

Environmental effect on vision-based structural dynamic displacement monitoring

Study on the dynamic properties of a suspended bridge using monocular digital photography to monitor the bridge dynamic deformation

Computer vision-based real-time deflection monitoring of complex and sizeable steel structures

Computer Vision-Based Real-Time Identification of Vehicle Loads for Structural Health Monitoring of Bridges

Computer Vision-Based Bridge Inspection and Monitoring: A Review