Abstract:In bridge structure monitoring and evaluation, deformation data serve as a crucial basis for assessing structural conditions. Different from discrete monitoring points, spatially continuous deformation modes provide a comprehensive understanding of deformation and potential information. Terrestrial laser scanning (TLS) is a three-dimensional deformation monitoring technique that has gained wide attention in recent years, demonstrating its potential in capturing structural deformation models. In this study, a TLS-based bridge deformation mode monitoring method is proposed, and a deformation mode calculation method combining sliding windows and surface fitting is developed, which is called the SWSF method for short. On the basis of the general characteristics of bridge structures, a deformation error model is established for the SWSF method, with a detailed quantitative analysis of each error component. The analysis results show that the deformation monitoring error of the SWSF method consists of four parts, which are related to the selection of the fitting function, the density of point clouds, the noise of point clouds, and the registration accuracy of point clouds. The error caused by point cloud noise is the main error component. Under the condition that the noise level of point clouds is determined, the calculation error of the SWSF method can be significantly reduced by increasing the number of points of point clouds in the sliding window. Then, deformation testing experiments were conducted under different measurement distances, proving that the proposed SWSF method can achieve a deformation monitoring accuracy of up to 0.1 mm. Finally, the proposed deformation mode monitoring method based on TLS and SWSF was tested on a railway bridge with a span of 65 m. The test results showed that in comparison with the commonly used total station method, the proposed method does not require any preset reflective markers, thereby improving the deformation monitoring accuracy from millimeter level to submillimeter level and transforming the discrete measurement point data form into spatially continuous deformation modes. Overall, this study introduces a new method for accurate deformation monitoring of bridges, demonstrating the significant potential for its application in health monitoring and damage diagnosis of bridge structures.

A remote deflection detection method for long-span bridges using adaptive mask and high-resolution camera

Multi-Point Displacement Monitoring of Bridges Using A Vision-Based Approach

A Vision-Based System for Dynamic Displacement Measurement of Long-Span Bridges: Algorithm and Verification

Non-contact measurement method of bridge deflection based on machine vision

Noncontact deflection measurement for bridge through a multi‐UAVs system

Robust optical displacement measurement of bridge structures in complex environments

Vision-based multi-point real-time monitoring of dynamic displacement of large-span cable-stayed bridges

Computer Vision-Based Pier Settlement Displacement Measurement of a Multispan Continuous Concrete Highway Bridge under Complex Construction Environments

High-Precision Monitoring Method for Bridge Deformation Measurement and Error analysis Based on Terrestrial Laser Scanning

Machine Learning-Based Distraction-Free Method for Measuring the Optical Displacement of Long-Span Bridge Structures

Bridge Displacement Monitoring Method Based on Laser Projection-Sensing Technology

Full-Field Bridge Deflection Monitoring with Off-Axis Digital Image Correlation

Point Cloud Registration Methods for Long-Span Bridge Spatial Deformation Monitoring Using Terrestrial Laser Scanning

Real‐time displacement measurement for long‐span bridges using a compact vision‐based system with speed‐optimized template matching

Environmental effect on vision-based structural dynamic displacement monitoring

Short-distance and long-distance bridge displacement measurement based on template matching and feature detection methods

An image-based bridge displacement field measurement method with self-vibration elimination

Computer vision-based real-time continuous monitoring of the pose for large-span bridge cable lifting structures

Sensing Mechanism and Real-Time Bridge Displacement Monitoring for a Laboratory Truss Bridge Using Hybrid Data Fusion.

Application Research of the Laser and Digital Image Processing in Bridge Monitoring.

An advanced vision-based deformation measurement method and application on a long-span cable-stayed bridge