Abstract:Dual fluidized bed (DFB) reactor systems are widely used in gas–solid two-phase flow applications, whose gas–solid flow characteristics have a significant effect on the performance of many kinds of technologies. A numerical simulation model was established on the basis of a large-scale DFB reactor with a maximum height of 21.6 m, and numerical simulations focused on gas–solid flow characteristics were carried out. The effects of the superficial gas velocity of both beds and the static bed height and particle size on the distribution of the pressure and solid suspension density and the solid circulation rate were studied. The simulation results were in good agreement with the experimental data. With the strong support of the experimental data, the gas–solid flow characteristics of large-scale DFB reactors were innovatively evaluated in this numerical simulation study, which effectively makes up for the shortcomings of the current research. The results showed that the superficial gas velocity of both beds and the static bed height have different degrees of influence on the gas–solid flow characteristics. Specifically, for 282 μm particles, when the superficial gas velocity of both beds and the static bed height were 4.5 m/s, 2.5 m/s, and 0.65 m, respectively, under typical working conditions, the bottom pressure of the two furnaces was 3412.42 Pa and 2812.86 Pa, respectively, and the solid suspension density was 409.44 kg/m3 and 427.89 kg/m3, respectively. Based on the simulation results, the empirical formulas of the solid circulation rate were fitted according to different particle sizes. Under similar conditions, the solid circulation rates of particles with a particle size of 100 μm, 282 μm, 641 μm, and 1000 μm were 2.84–13.28, 0.73–4.91, 0.024–0.216, and 0.0026–0.0095 kg/(m2s), respectively. It can be found that the influence of the particle size on the solid circulation rate is the most significant among all parameters.

Numerical simulation of fluidized bed: A bibliometric analysis of research progress and prospects

Research Progress in Numerical Models on Gas-Solid Fluidization of Cohesive Particles

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

Numerical Simulations of a Bubbling Fluidized Bed Reactor with an Energy Minimization Multiscale Bubble Based Model: Effect of the Mesoscale

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Critical Comparison of Electrostatic Effects on Hydrodynamics and Heat Transfer in a Bubbling Fluidized Bed with a Central Jet

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Numerical Simulation of the Characteristics of Particle Flows in an Internally Circulating Fluidized Bed

Numerical Study of Particle Injection into a Gas-Solid Fluidized Bed

Multi-scale numerical simulation of fluidized beds: Model applicability assessment

Numerical Simulation of Two-Dimensional Spouted Bed with Draft Plates by Discrete Element Method

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

A Numerical Study on Gas-Fluidized Beds of Wet Flexible Fibers

Multi-scale Numerical Simulation of Fluidized Beds:Model Applicability Assessment

Numerical simulation of radiation heat transfer characteristics in a cylindrical fluidized bed

Numerical Prediction of Flow Hydrodynamics of Wet Molecular Sieve Particles in a Liquid-Fluidized Bed

Numerical Simulation Study on the Gas–Solid Flow Characteristics of a Large-Scale Dual Fluidized Bed Reactor: Verification and Extension

Numerical Simulation Of The Gas-Solid Flow In A Square Circulating Fluidized Bed With Secondary Air Injection

Three-dimensional Numerical Study on Flow Dynamics Characteristics in Supercritical Water Fluidized Bed with Consideration of Real Particle Size Distribution by Computational Particle Fluid Dynamics Method

A Euler-Euler Hydrodynamic Modelling and Simulation of Dense Particle Flow in a Small-Scale Fluidized Bed

Numerical Simulation of Bubble and Particles Motions in a Bubbling Fluidized Bed Using Direct Simulation Monte-Carlo Method