Abstract:Accurate measurements of the radon exhalation rate help identify and evaluate radon risk regions in the environment. Among these measurement methods, the closed-loop method is frequently used. However, traditional experiments are insufficient or cannot analyze the radon migration and exhalation patterns at the gas–solid interface in the accumulation chamber. The CFD-based technique was applied to predict the radon concentration distribution in a limited space, allowing radon accumulation and exhalation inside the chamber intuitively and visually. In this study, three radon exhalation rates were defined, and two structural ventilation tubes were designed for the chamber. The consistency of the simulated results with the variation in the radon exhalation rate in a previous experiment or analytical solution was verified. The effects of the vent tube structure and flow rate on the radon uniformity in the chamber; permeability, insertion depth, and flow rate on the radon exhalation rate and the effective diffusion coefficient on back-diffusion were investigated. Based on the results, increasing the insertion depth from 1 to 5 cm decreased the effective decay constant by 19.55%, whereas the curve-fitted radon exhalation rate decreased (lower than the initial value) as the deviation from the initial value increased by approximately 7%. Increasing the effective diffusion coefficient from 2.77 × 10 −7 to 7.77 × 10 −6 m 2 s −1 made the deviation expand from 2.14 to 15.96%. The conclusion is that an increased insertion depth helps reduce leakage in the chamber, subject to notable back-diffusion, and that the closed-loop method is reasonably used for porous media with a low effective diffusion coefficient in view of the back-diffusion effect. The CFD-based simulation is expected to provide guidance for the optimization of the radon exhalation rate measurement method and, thus, the accurate measurement of the radon exhalation rate.

Computational fluid dynamics modelling for indoor radioactive pollutant study

Simulation of the Concentrations and Distributions of Indoor Radon and Thoron

Numerical analysis and modeling of two-loop experimental setup for measurements of radon diffusion rate through building and insulation materials

A Computational Fluid Dynamics code for aerosol and decay-product studies in indoor environments

A computational modeling of airflow and radon progeny deposition in human respiratory system

A model to predict indoor concentrations and internal radiation doses of radioactive aerosols from nuclear accidents

Computational analysis of radon progeny deposition patterns in the human respiratory system

Numerical simulations for radon migration and exhalation behavior during measuring radon exhalation rate with closed-loop method

A Method for the Assessment of the Inhalation Dose Exposure to Radionuclides in an Indoor Environment

CFD based simulation of indoor radon distribution from the use of different brands of decorative glazed tiles made in China

An Indoor Airflow Simulation And Airborne Dust Concentration Analysis

Numerical Simulation of Radioactive Material Around Opening-Windows Construction

Simulation of Heavy Gas Dispersion in A Large Indoor Space Using Cfd Model

Numerical modelling of radon-222 entry into houses: an outline of techniques and results

Indoor Air Distribution Simulation of Radon in Underground Space

Numerical Simulation on Radon Retardation Behavior of Covering Floats in Radon-Containing Water

Numerical Analysis for the Optimization of Multi-Parameters Stratum Ventilation and the Effect on Radon Dispersion

Nonlinear Analysis of Indoor Radon Concentration

Lagrangian Particle Modeling in the Indoor Environment: A Comparison of RANS and LES Turbulence Methods (RP-1512)

Numerical Modeling of the Sources and Behaviors of 222rn, 220rn and Their Progenies in the Indoor Environment—a Review

Indoor concentrations of radioactive aerosols from nuclear accidents