Abstract:Backgrounds: Exposure to nanoparticles in the workplace is a health concern to occupational workers with increased risk of developing respiratory, cardiovascular, and neurological disorders. Based on animal inhalation study and human lung tumor risk extrapolation, current authoritative recommendations on exposure limits are either on total mass or number concentrations. Effects of particle size distribution and the implication to regional airway dosages are not elaborated. Methods: Real time production of particle concentration and size distribution in the range from 5.52 to 98.2 nm were recorded in a wire-cut electrical discharge machine shop (WEDM) during a typical working day. Under the realistic exposure condition, human inhalation simulations were performed in a physiologically realistic nasal and upper airway replica. The combined experimental and numerical study is the first to establish a realistic exposure condition, and under which, detailed dose metric studies can be performed. In addition to mass concentration guided exposure limit, inhalation risks to nano-pollutant were reexamined accounting for the actual particle size distribution and deposition statistics. Detailed dosimetries of the inhaled nano-pollutants in human nasal and upper airways with respect to particle number, mass and surface area were discussed, and empirical equations were developed. Results: An astonishing enhancement of human airway dosages were detected by current combined experimental and numerical study in the WEDM machine shop. Up to 33 folds in mass, 27 folds in surface area and 8 folds in number dosages were detected during working hours in comparison to the background dosimetry measured at midnight. The real time particle concentration measurement showed substantial emission of nano-pollutants by WEDM machining activity, and the combined experimental and numerical study provided extraordinary details on human inhalation dosimetry. It was found out that human inhalation dosimetry was extremely sensitive to real time particle concentration and size distribution. Averaged particle concentration over 24-h period will inevitably misrepresent the sensible information critical for realistic inhalation risk assessment. Conclusions: Particle size distribution carries very important information in determining human airway dosimetry. A pure number or mass concentration recommendation on the exposure limit at workplace is insufficient. A particle size distribution, together with the deposition equations, is critical to recognize the actual exposure risks. In addition, human airway dosimetry in number, mass and surface area varies significantly. A complete inhalation risk assessment requires the knowledge of toxicity mechanisms in response to each individual metric. Further improvements in these areas are needed.

A Method for the Assessment of the Inhalation Dose Exposure to Radionuclides in an Indoor Environment

A model to predict indoor concentrations and internal radiation doses of radioactive aerosols from nuclear accidents

A computational modeling of airflow and radon progeny deposition in human respiratory system

Indoor concentrations of radioactive aerosols from nuclear accidents

Radon survey in office room and effective dose estimation for staff

Establishment of detailed respiratory tract model and Monte Carlo simulation of radon progeny caused dose.

Radiation Exposure Due to 222rn, 220rn and Their Progenies in Three Metropolises in China and Japan with Different Air Quality Levels.

Study on Influence Parameters of Effective Dose Conversion Factors in Indoor Environment

Investigation of the indoor 222Rn and 220Rn levels in the residential environment and estimation of the annual effective radiation dose for ordinary residents

Nonlinear Analysis of Indoor Radon Concentration

A combined experimental and numerical study on upper airway dosimetry of inhaled nanoparticles from an electrical discharge machine shop

Numerical Analysis for the Optimization of Multi-Parameters Stratum Ventilation and the Effect on Radon Dispersion

Inhalation Exposure Factors of Residents in a Typical Region in Northern China

Simulation of the Concentrations and Distributions of Indoor Radon and Thoron

Computational fluid dynamics modelling for indoor radioactive pollutant study

Monte Carlo Simulation of Indoor External Exposure due to Gamma-emitting Radionuclides in Building Materials

Quantitative health risk assessment of inhalation exposure to polycyclic aromatic hydrocarbons on citizens in Tianjin, China

Numerical Study of Inter-Building Dispersion in Residential Environments: Prediction Methods Evaluation and Infectious Risk Assessment

Radioactive Gas Diffusion Simulation and Inhaled Effective Dose Evaluation During Nuclear Decommissioning

An Integrated Solution for Nuclear Power Plant On-Site Optimal Evacuation Path Planning Based on Atmospheric Dispersion and Dose Model

A Novel Approach for Predicting the Mid–Long-Term Radiation Dose in the Case of a Hypothetical STSBO Nuclear Accident for an Operating Nuclear Power Plant