Abstract:The numerical simulation of the air flow of the room equipped with the crossflow fan air conditioners has been conducted a lot. However, the simulation of the air flow distribution under the heating mode has always been difficult to match the experimental data well, due to the fact that both the air temperature and the flow are affected by the buoyancy. In addition, very few full-scale simulations were conducted. To precisely predict the air flow and temperature distribution of the room with the crossflow fan air conditioner, a full-scale steady numerical simulation was conducted with the Computational Fluid Dynamics (CFD) package. The full-scale physical model was constructed strictly according to the real settings, including the detailed components of the air-conditioner, such as the crossflow fan and the heat exchangers. The Shear-Stress Transport (SST) k-ω turbulent model was selected to simulate the low Reynold flow near the inner surface of the room, and to simulate the high Reynold and transitional flow near the fan blades of the air-conditioner. The porous medium model was used to simulate the heat exchange fins in the air-conditioner. Furthermore, an experiment under the same condition was also conducted to verify the accuracy of the simulation. Results showed that the simulated supply air flow rate was 537.48 m 3 /h, producing a 4.97% deviation from the experiment result. Meanwhile, the upward movement of the supply air from the outlet of the air-conditioner was observed, leading to higher air temperatures in the upper region of the room. Furthermore, among all 210 measured temperature data points in the room, 149 data points had the deviation within ±5%, and 194 data points had the deviation within ±10%. 9 abnormal data points with greater deviation near the door were detected, which might be resulted from the outdoor cold air leakage through the crack between the door and the floor in the experiment. Conclusively, the full-scale numerical simulation in this study produced an accurate and reliable solution to predict the air temperature distribution in buildings, thus providing a potential method for the design or optimization of the air-conditioners.

A Cfd-Based Test Method For Control Of Indoor Environment In Air-Conditioned Rooms

Nonlinear Model Reduction for Simulation and Control of Temperature Distribution in Air Conditioned Rooms

A Fast-Pod Model for Simulation and Control of Indoor Thermal Environment of Buildings

Design of Temperature Testing System in Multi-Parameter Combined Environmental Test

A Multiple Model Approach for Predictive Control of Indoor Thermal Environment with High Resolution

Model-based Fault Detection and Diagnosis for HVAC.

Optimum Control Strategy and Performance Simulation of a Constant Temperature and Humidity Air-conditioning System

CFD simulation research on residential indoor air quality

Development of Real-Time Adaptive Model-Free Extremum Seeking Control for CFD-simulated Thermal Environment

CFD results calibration from sparse sensor observations with a case study for indoor thermal map

Air supply parameter optimization of a custom nonuniform temperature field based on the POD method

Fuzzy Logic Controlled Simulation in Regulating Thermal Comfort and Indoor Air Quality Using a Vehicle Heating, Ventilation, and Air-Conditioning System

Indoor pollution control based on surrogate model for residential buildings

A Review of CFD Analysis Methods for Personalized Ventilation (PV) in Indoor Built Environments

Numerical simulation of air distribution in chair ventilated rooms by simplified methodology

CFD boundary conditions for contaminant dispersion, heat transfer and airflow simulations around human occupants in indoor environments

Fast and accurate prediction of air temperature and velocity field in non-uniform indoor environment under complex boundaries

Indoor Environmental Analysis based on Coupled Simulation of CFD, Air-conditioning System and Model Predictive Control

The Cps-Based Simulation Of Indoor Thermal Comfort Control With Energy Saving

Full-scale numerical simulation and experimental validation of the thermal environment under the heating mode in an air-conditioned room

Improving Non-isothermal Airflow Pattern Designing with CFD Method