Abstract:Purpose The purpose of this paper is to analyse the thermal environment of two engineering testing centres cooled via different means using computational fluid dynamics (CFD), focussing on the indoor temperature and air movement. This computational technique has been used in the analysis of thermal environment in buildings where the profiles of thermal comfort parameters, such as air temperature and velocity, are studied. Design/methodology/approach A pilot survey was conducted at two engineering testing centres – a passively cooled workshop and an air-conditioned laboratory. Electronic sensors were used in addition to building design documentation to collect the required information for the CFD model–based prediction of air temperature and velocity distribution patterns for the laboratory and workshop. In the models, both laboratory and workshop were presumed to be fully occupied. The predictions were then compared to empirical data that were obtained from field measurements. Operative temperature and predicted mean vote (PMV)–predicted percentage dissatisfied (PPD) indices were calculated in each case in order to predict thermal comfort levels. Findings The simulated results indicated that the mean air temperatures of 21.5°C and 32.4°C in the laboratory and workshop, respectively, were in excess of the recommended thermal comfort ranges specified in MS1525, a local energy efficiency guideline for non-residential buildings. However, air velocities above 0.3 m/s were predicted in the two testing facilities, which would be acceptable to most occupants. Based on the calculated PMV derived from the CFD predictions, the thermal sensation of users of the air-conditioned laboratory was predicted as −1.7 where a “slightly cool” thermal experience would prevail, but machinery operators in the workshop would find their thermal environment too warm with an overall sensation score of 2.4. A comparison of the simulated and empirical results showed that the air temperatures were in good agreement with a percentage of difference below 2%. However, the level of correlation was not replicated for the air velocity results, owing to uncertainties in the selected boundary conditions, which was due to limitations in the measuring instrumentation used. Research limitations/implications Due to the varying designs, the simulated results of this study are only applicable to laboratory and workshop facilities located in the tropics. Practical implications The results of this study will enable building services and air-conditioning engineers, especially those who are in charge of the air-conditioning and mechanical ventilation (ACMV) system design and maintenance to have a better understanding of the thermal environment and comfort conditions in the testing facilities, leading to a more effective technical and managerial planning for an optimised thermal comfort management. The method of this work can be extended to the development of CFD models for other testing facilities in educational institutions. Social implications The findings of this work are particularly useful for both industry and academia as the indoor environment of real engineering testing facilities were simulated and analysed. Students and staff in the higher educational institutions would benefit from the improved thermal comfort conditions in these facilities. Originality/value For the time being, CFD studies have been carried out to evaluate thermal comfort conditions in various building spaces. However, the information of thermal comfort in the engineering testing centres, of particular those in the hot–humid region are scantily available. The outcomes of this simulation work showed the usefulness of CFD in assisting the management of such facilities not only in the design of efficient ACMV systems but also in enhancing indoor thermal comfort.

CFD simulation research on residential indoor air quality

A Cfd-Based Test Method For Control Of Indoor Environment In Air-Conditioned Rooms

Simulation and Analysis of the Outdoor Wind Environment at the Early Stage of Design

Simulation of indoor pollutant diffusion concentration field in passive house based on CFD software

Examination and Optimization of Classroom Indoor Environments in China’s Hot Summer and Cold Winter Regions

Numerical Simulation on Indoor Thermal Environment of Radiant Flooring Cooling System with Displacement Ventilation

Full-scale numerical simulation and experimental validation of the thermal environment under the heating mode in an air-conditioned room

Thermal comfort prediction of air-conditioned and passively cooled engineering testing centres in a higher educational institution using CFD

Simulation of Indoor Pollutant Distribution in Residential Buildings under Different Ventilation Modes

A Review of CFD Analysis Methods for Personalized Ventilation (PV) in Indoor Built Environments

Numerical Simulation of the Influence of the New Air Volume of Fresh Air Exchanger on the Indoor Flow Field of the Residence

CFD boundary conditions for contaminant dispersion, heat transfer and airflow simulations around human occupants in indoor environments

An Integrated Experimental and CFD Analysis of Ceiling-Fan-Integrated Air Conditioning System: Indoor Air Quality and Air Velocity

Numerical simulation and thermal comfort analysis of indoor air distribution in large space buildings

Numerical analysis of outdoor thermal environment around buildings

Multi-fanning and its improvement of thermal and wind comfort: An auxiliary means to air conditioning

Numerical Study On Indoor Air Distribution For Vav System

Case Study: Impacts of Air-Conditioner Air Supply Strategy on Thermal Environment and Energy Consumption in Offices Using BES-CFD Co-Simulation

Simulation of wind-driven ventilative cooling systems for an apartment building in Beijing and Shanghai

Numerical simulation and site measurements of ventilation efficiency for different types of air-conditioned rooms through window-opening natural ventilation

An Investigation on Outdoor Ventilation Performance in High-Rise Residential Districts Based on CFD Simulation and Field Measurement