Abstract:Temperature and humidity are two important factors that influence both indoor thermal comfort and air quality. Through varying compressor and supply fan speeds of a direct expansion (DX) air conditioning (A/C) unit, the air temperature and humidity in the conditioned space can be regulated simultaneously. However, most existing controllers are designed to minimize the tracking errors between the system outputs with their corresponding settings as quickly as possible. The energy consumption, which is directly influenced by the compressor and supply fan speeds, is not considered in the relevant controller formulations, and thus the system may not operate with the highest possible energy efficiency. To effectively control temperature and humidity while minimizing the system energy consumption, a model predictive control (MPC) strategy was developed for a DX A/C system, and the development results are presented in this paper. A physically-based dynamic model for the DX A/C system with both sensible and latent heat transfers being considered was established and validated by experiments. To facilitate the design of MPC, the physical model was further linearized. The MPC scheme was then developed by formulating the objective function which sought to minimize the tracking errors of temperature and moisture content while saving energy consumption. Based on the results of command following and disturbance rejection tests, the proposed MPC scheme was capable of controlling temperature and humidity with adequate control accuracy and sensitivity. In comparison to linear-quadratic-Gaussian (LQG) controller, better control accuracy and lower energy consumption could be realized when using the proposed MPC strategy to simultaneously control temperature and humidity.

A Fast-Pod Model for Simulation and Control of Indoor Thermal Environment of Buildings

Nonlinear Model Reduction for Simulation and Control of Temperature Distribution in Air Conditioned Rooms

A Cfd-Based Test Method For Control Of Indoor Environment In Air-Conditioned Rooms

A Multiple Model Approach for Predictive Control of Indoor Thermal Environment with High Resolution

Optimization of Ventilation System Operation in Office Environment Using Pod Model Reduction and Genetic Algorithm

Fast and accurate prediction of air temperature and velocity field in non-uniform indoor environment under complex boundaries

Real-Time Reconstruction Of Contaminant Dispersion From Sparse Sensor Observations With Gappy Pod Method

Development of Real-Time Adaptive Model-Free Extremum Seeking Control for CFD-simulated Thermal Environment

Comfort-Aware Building Climate Control Using Distributed-Parameter Models

An Integrated Modeling Tool For Simultaneous Analysis Of Thermal Performance And Indoor Air Quality In Building

Air supply parameter optimization of a custom nonuniform temperature field based on the POD method

Ventilation and Temperature Control for Energy-efficient and Healthy Buildings: A Differentiable PDE Approach

A state-space model for dynamic response of indoor air temperature and humidity

An integrated modeling tool for simultaneous analysis of thermal performance and indoor air quality in buildings

Fast Temperature Prediction in a Real Data Center of Multi-Variables Based on the Reduced Order Model Combined with Data-Driven Method

Offset-Free Koopman Model Predictive Control of Thermal Comfort Regulation for A VRF-DOAS Combined System

Heating Control Strategy Based on Dynamic Programming for Building Energy Saving and Emission Reduction

Model predictive control of indoor thermal environment conditioned by a direct expansion air conditioning system

Online Model Estimation for Predictive Thermal Control of Buildings

A Fast and Efficient Method for Predicting Fluid Flow and Heat Transfer Problems

Energy efficient model based algorithm for control of building HVAC systems