Abstract:This study concerns the development of a data-based compact model for the prediction of the fluid temperature evolution in district heating (DH) pipeline networks. This so-called "reduced-order model" (ROM) is obtained from reduction of the conservation law for energy for each pipe segment to a semi-analytical input-output relation between the pipe outlet temperature and the pipe inlet and ground temperatures that can be identified from training data. The ROM basically is valid for generic pipe configurations involving 3D unsteady heat transfer and 3D steady flow as long as heat-transfer mechanisms are linearly dependent on the temperature field. Moreover, the training data can be generated by physics-based computational "full-order" models (FOMs) yet also by (calibration) experiments or field measurements. Performance tests using computational training data for a single 1D pipe configuration demonstrate that the ROM (i) can be successfully identified and (ii) can accurately describe the response of the outlet temperature to arbitrary input profiles for inlet and ground temperatures. Application of the ROM to two case studies, i.e. fast simulation of a small DH network and design of a controller for user-defined temperature regulation of a DH system, demonstrate its predictive ability and efficiency also for realistic systems. Dedicated cost analyses further reveal that the ROM may significantly reduce the computational costs compared to FOMs by (up to) orders of magnitude for higher-dimensional pipe configurations. These findings advance the proposed ROM as a robust and efficient simulation tool for practical DH systems with a far greater predictive ability than existing compact models.

Nonlinear Model Reduction for Simulation and Control of Temperature Distribution in Air Conditioned Rooms

A Fast-Pod Model for Simulation and Control of Indoor Thermal Environment of Buildings

A Cfd-Based Test Method For Control Of Indoor Environment In Air-Conditioned Rooms

A Multiple Model Approach for Predictive Control of Indoor Thermal Environment with High Resolution

Low‐dimensional Modeling of Linear Heat Transfer Systems Using Incremental the Proper Orthogonal Decomposition Method

Fast Model Order Reduction Via Nonlinear Optimization

Optimization of Ventilation System Operation in Office Environment Using Pod Model Reduction and Genetic Algorithm

A method for model-reduction of non-linear thermal dynamics of multi-zone buildings

Fast and accurate prediction of air temperature and velocity field in non-uniform indoor environment under complex boundaries

Control of In-Room Temperature Field via Damping Assignment to Nonlinear Koopman Mode

Fluid Field Model Order Reduction Method for System-Level Simulation and Optimization

A Frequency Domain Dynamic Simulation Method for Heat Exchangers and Thermal Systems

Data-driven temperature estimation of non-contact solids using deep-learning re duce d-order models

POD-based Reconstruction Field of Temperature in Navier-Stokes Flow

A Co-Simulation Method of Refrigerator System and Temperature Field

REDUCED ORDER MODELING WITH THE PROPER ORTHOGONAL DECOMPOSITION

Development of a reduced-order AROMM model for the nonlinear thermal simulation of electronic components

Numerical Investigations on Model Order Reduction to SEM Based on POD-DEIM to Linear/nonlinear Heat Transfer Problems

A reduced-order model for dynamic simulation of district heating networks

A domain decomposing reduced-order method for solving the multi-domain transient heat conduction problems

Development of Temperature Controllers for a Room Deploying the Displacement Ventilation for Heating, Ventilating, and Air-Conditioning