Abstract:As a traditional method of waste treatment, municipal solid waste incineration (MSWI) has become one of the main methods of urban waste treatment. However, as a byproduct of MSWI, a large amount of MSWI bottom ash is not reused in current practice. This study innovatively posits MSWI bottom ash as an eco-friendly adsorbent rather than a pollutant, exploring its potential application as a permeable subgrade material. The results reveal that MSWI bottom ash exhibits promising properties to serve as a permeable subgrade material to achieve the permeability and improve the sustainability for subgrade. Due to the arrangement of its particles, it shows excellent performance in shear strength and permeability, which are comparable to or surpass those of sandy soils. The average pore width of 14.200 nm allows heavy metal substances to be encapsulated within the matrix, significantly reducing their leachability, thereby aligning with environmental friendliness standards. Its adsorption capacity is about 6.60 mg/g, and the adsorption capacity per volume is 3.66 times and 2.04 times that of fly ash and clay, respectively. The mechanism analysis shows that the adsorption process is monolayer heterogeneous adsorption. This paper presents a novel perspective on reusing MSWI bottom ash and provides evidence supporting its effective utilization as a permeable subgrade material, offering substantial environmental benefits through enhanced adsorption ability.Implications: Municipal solid waste incineration (MSWI) is a common method for municipal solid waste treatment, while the MSWI bottom ash is often not reused. This paper explored the explores the feasibility of using MSWI bottom ash as a permeable road base material. The results show that the particle arrangement enables excellent shear strength and permeability, comparable to sandy soil. It meets safety requirements for the leaching of heavy metals and acts as an adsorbent for pollutants leaching from permeable pavements. Furthermore, the mechanisms underlying these behaviors of MSWI were confirmed by microstructural and mineralogical analyses. These indicate that MSWI bottom ash has great potential as a permeable road base material. This paper provides a clear understanding of the physical, mechanical and environmental properties of MSWI bottom ash, which can promote its reuse in practice.

PHYSICAL AND CHEMICAL CHARACTERIZATIONS OF MSWI BOTTOMASH

Content, Mobility and Transfer Behavior of Heavy Metals in Mswi Bottom Ash in Zhejiang Province, China

Solidification of dewatered sewage sludge using bottom ash of MSWI as skeleton material

A review on the utilization of municipal solid waste incineration (MSWI) bottom ash as a mineral resource for construction materials

Measurements of geotechnical properties of municipal solid waste incineration fly ash stabilized by chemical reagents

Chemical and Geotechnical Properties of Solidified/stabilized MSWI Fly Ash Disposed at a Landfill in China

Use of municipal solid waste incineration (MSWI) bottom ash as a permeable subgrade material: An experimental and mechanism study

Leaching behavior of heavy metals and PAHs from MSWI bottom ash in a long-term static immersing experiment.

Study of Ashes from a Medical Waste Incinerator in China: Physical and Chemical Characteristics on Fly Ash, Ash Deposits and Bottom Ash

Characteristics Investigation of the Solid Residues from CFB Municipal Solid Waste Incinerator

Characterization of controlled low-strength material obtained from dewatered sludge and refuse incineration bottom ash: mechanical and microstructural perspectives

Content and fractionation of Cu, Zn and Cd in size fractionated municipal solid waste incineration bottom ash.

Physiochemical properties, heavy metal leaching characteristics and reutilization evaluations of solid ashes from municipal solid waste incinerator plants

Structural and Textural Characteristics of Municipal Solid Waste Incineration Bottom Ash Subjected to Periodic Seasoning

Beneficial Reuse of Municipal Solid Waste Incineration Bottom Slag in Civil Engineering

Study on the Leachability of Heavy Metals and Polycyclic Aromatic Hydrocarbons from MSW Incineration Bottom ash

Characterization and mechanical removal of metallic aluminum (Al) embedded in weathered municipal solid waste incineration (MSWI) bottom ash for application as supplementary cementitious material

Investigation of Cu Leaching from Municipal Solid Waste Incinerator Bottom Ash with a Comprehensive Approach

Resource recovery potential of incineration bottom ash fine fraction

Characteristics of incineration ash for sustainable treatment and reutilization

Characteristics and release potential of microplastics in municipal solid waste incineration bottom ash