Abstract:Basic properties of fly ash samples from different urban waste combustion facilities in China were analyzed using as X-ray fluorescence (XRF), scanning electron microscopy (SEM), X-ray diffraction (XRD). The leaching toxicity procedure and some factors influencing heavy metals distribution in fly ash were further investigated. Experimental results indicate that the fly ash structures are complex and its properties are variable. The results of XRF and SEM revealed that the major elements (>10000 mg/kg, listed in decreasing order of abundance) in fly ash are O, Ca, Cl, Si, S, K, Na, Al, Fe and Zn. These elements account for 93% to 97%, and the content of Cl ranges from 6.93% to 29.18 %, while that of SiO2 does from 4.48% to 24.84%. The minor elements (1000 to 10000 mg/kg) include Cr, Cu and Pb. Primary heavy metals in fly ash include Zn, Pb, Cr, Cu etc. According to standard leaching test, heavy metal leaching levels vary from 0 to 163.10 mg/L (Pb) and from 0.049 to 164.90 mg/L (Zn), mostly exceeding the Chinese Identification Standard for hazardous wastes. Morphology of fly ash is irregular, with both amorphous structures and polycrystalline aggregates. Further research showed that heavy metals were volatilized at a high furnace temperature, condensed when cooling down during the post-furnace system and captured at air pollution control systems. Generally, heavy metals are mainly present in the forms of aerosol particulates or tiny particulates enriched on surfaces of fly ash particles. The properties of fly ash are greatly influenced by the treatment capacities of incinerators or the variation of waste retention time in chamber. Fly ash from combustors of larger capacities generally has higher contents of volatile component and higher leaching toxicity, while those of smaller capacities often produce fly ash containing higher levels of nonvolatile components and has lower toxicity. The content of heavy metals and leaching toxicity maybe have no convincing correlation, and high alkali content of CaO greatly contribute to leaching toxicity of heavy metal and acid neutralization capacity against acid rain.

Characteristics Investigation of the Solid Residues from CFB Municipal Solid Waste Incinerator

Measurements of geotechnical properties of municipal solid waste incineration fly ash stabilized by chemical reagents

Chemical and Geotechnical Properties of Solidified/stabilized MSWI Fly Ash Disposed at a Landfill in China

Utilization of Cow Bone Waste and Calcium Oxide for the Solidification and Stabilization of MSWI Fly Ash: Towards Sustainable Practices

The Characterization of Sintering Deposit on the Heat-Transfer Surface of CFB Municipal Solid Waste Incinerator

Content, Mobility and Transfer Behavior of Heavy Metals in Mswi Bottom Ash in Zhejiang Province, China

Particularities Concerning Sintered Ash Deposits along Flue Ways of CFB Waste Incinerators

Characteristics of the cement-solidified municipal solid waste incineration fly ash

Study on Characteristics of CFBB Desulfurated Fly Ash and Pulverized Fly Ash

Study of Ashes from a Medical Waste Incinerator in China: Physical and Chemical Characteristics on Fly Ash, Ash Deposits and Bottom Ash

Sintering and Deposition Characteristics of Ashes with High Calcium and Chlorine Content from a Medical Wastes Incinerator

Investigation of Basic Properties of Fly Ash from Urban Waste Incinerators in China.

Characterization of Dioxins and Heavy Metals in Chelated Fly Ash

Study on characterization of ash from co-combustion of coal with municipal solid waste

Effects of Hydrothermal Treatment on the Major Heavy Metals in Fly Ash from Municipal Solid Waste Incineration

Kinetics and fusion characteristics of municipal solid waste incineration fly ash during thermal treatment

Analysis on the Contents and Leaching Characteristics of Heavy Metals in MSWI Fly Ash

Analysis of composition characteristics and treatment techniques of municipal solid waste incineration fly ash in China

A comparative study on characteristics and leaching toxicity of fluidized bed and grate furnace MSWI fly ash

SEM/EDS and XRD characterization of raw and washed MSWI fly ash sintered at different temperatures.

Insights into Microstructural Alterations in Alkali-Activated Materials Incorporating Municipal Solid Waste Incineration Fly Ash