Abstract:Basic properties of fly ash samples from different urban waste combustion facilities in China were analyzed using as X-ray fluorescence (XRF), scanning electron microscopy (SEM), X-ray diffraction (XRD). The leaching toxicity procedure and some factors influencing heavy metals distribution in fly ash were further investigated. Experimental results indicate that the fly ash structures are complex and its properties are variable. The results of XRF and SEM revealed that the major elements (>10000 mg/kg, listed in decreasing order of abundance) in fly ash are O, Ca, Cl, Si, S, K, Na, Al, Fe and Zn. These elements account for 93% to 97%, and the content of Cl ranges from 6.93% to 29.18 %, while that of SiO2 does from 4.48% to 24.84%. The minor elements (1000 to 10000 mg/kg) include Cr, Cu and Pb. Primary heavy metals in fly ash include Zn, Pb, Cr, Cu etc. According to standard leaching test, heavy metal leaching levels vary from 0 to 163.10 mg/L (Pb) and from 0.049 to 164.90 mg/L (Zn), mostly exceeding the Chinese Identification Standard for hazardous wastes. Morphology of fly ash is irregular, with both amorphous structures and polycrystalline aggregates. Further research showed that heavy metals were volatilized at a high furnace temperature, condensed when cooling down during the post-furnace system and captured at air pollution control systems. Generally, heavy metals are mainly present in the forms of aerosol particulates or tiny particulates enriched on surfaces of fly ash particles. The properties of fly ash are greatly influenced by the treatment capacities of incinerators or the variation of waste retention time in chamber. Fly ash from combustors of larger capacities generally has higher contents of volatile component and higher leaching toxicity, while those of smaller capacities often produce fly ash containing higher levels of nonvolatile components and has lower toxicity. The content of heavy metals and leaching toxicity maybe have no convincing correlation, and high alkali content of CaO greatly contribute to leaching toxicity of heavy metal and acid neutralization capacity against acid rain.

Study of Ashes from a Medical Waste Incinerator in China: Physical and Chemical Characteristics on Fly Ash, Ash Deposits and Bottom Ash

Typical Pollutants in Bottom Ashes from a Typical Medical Waste Incinerator

Measurements of geotechnical properties of municipal solid waste incineration fly ash stabilized by chemical reagents

Content, Mobility and Transfer Behavior of Heavy Metals in Mswi Bottom Ash in Zhejiang Province, China

Physical and Chemical Characterization of Ashes from a Municipal Solid Waste Incinerator in China

Characteristics of the ash deposits from incinerated municipal solid waste

Basic properties of fly ash from incineration of municipal solid waste

Study on Basic Characteristics of Fly Ashes from Municipal Solid Waste Incinerator

Investigation of Basic Properties of Fly Ash from Urban Waste Incinerators in China.

Sintering and Deposition Characteristics of Ashes with High Calcium and Chlorine Content from a Medical Wastes Incinerator

Characterization of Dioxins and Heavy Metals in Chelated Fly Ash

Physicochemical Characteristics of Typical Fly Ashes of Solid Waste Incineration Plants in China

Study on Physicochemical Characteristics of Municipal Solid Waste Incineration (MSWI) Fly Ash

Characteristics Investigation of the Solid Residues from CFB Municipal Solid Waste Incinerator

Engineering Characteristics of Bottom Ash in Municipal Solid Waste Incinerators

ANALYSIS OF BASIC CHARACTERISTICS CONCERNING FLY ASH FROM MSW INCINERATION IN EAST CHINA

Characterization of Fly Ashes from Two Chinese Municipal Solid Waste Incinerators

Characteristics of fly ash from waste-to-energy plants adopting grate-type or circulating fluidized bed incinerators: a comparative study

Study of PCDD/Fs Distribution in Fly Ash, Ash Deposits, and Bottom Ash from a Medical Waste Incinerator in China

Levels and environmental impact of PAHs and trace element in fly ash from a miscellaneous solid waste by rotary kiln incinerator, China

Analysis Of The Characteristics Of Fly Ash From Hospital Solid Waste Incinerations