Abstract:Wet treatment is usually employed to recover metals from bottom ash. However, its effectiveness on regulating the leaching behavior of bottom ash and minimizing environmental impact is still unquantified when it is used as engineering materials. This study characterized the leaching toxicity of targeted pollutants including Cu, Zn, Ni, SO 4 2− and Cl − in fresh bottom ash and treated bottom ash using batch, standard column up-flow leaching and simulated rainfall down-flow leaching tests. Results from the batch leaching revealed that the potential environmental risk of fresh bottom ash could not be ignored, and the leaching concentrations of the targeted pollutants in fresh bottom ash are generally higher than those of treated bottom ash. The washing process significantly promoted the release of pollutants: This behavior was due both to the increase in surface area and the release of contaminants into water. Furthermore, when bottom ash was applied in water dynamic system such as rainfall environment, its toxicity leaching should be paid more attention onto the early leaching stage with a high release of water dissolved salts, Cl − and SO 4 2− . The leaching concentration of Cu particularly exceeded the limit value before the liquid-to-solid ( L / S ) ratio = 1. Meanwhile, it was also noted that the leaching of SO 4 2− , Ni, Cu and Zn in water dynamic system were directly proportionate to L / S ratio. The leaching concentration of the targeted pollutants obtained from the simulate rainfall down-flow tests was 4–6 times higher than those from the standard up-flow column when at the same ratio of liquid and solid.

Leaching behavior of heavy metals and PAHs from MSWI bottom ash in a long-term static immersing experiment.

Content, Mobility and Transfer Behavior of Heavy Metals in Mswi Bottom Ash in Zhejiang Province, China

Leaching behavior of heavy metals from municipal solid waste incineration bottom ash and its geochemical modeling

Study on the Leachability of Heavy Metals and Polycyclic Aromatic Hydrocarbons from MSW Incineration Bottom ash

Leaching toxicity characteristics of municipal solid waste incineration bottom ash

Leaching of Heavy Metals from MSWI Fly Ash: Experiments Vs. Simulation

Investigation of Cu Leaching from Municipal Solid Waste Incinerator Bottom Ash with a Comprehensive Approach

Rapid Leaching Test and Treatment for Heavy Metals in Bottom Ash from Hazardous Waste Incinerator

THE LONG-TERM LEACHING BEHAVIOR OF AIR POLLUTION CONTROL RESIDUES AND ITS TREATMENT PRODUCTS

Leaching Characteristics of Heavy Metals in Municipal Solid Waste Incinerator Fly Ash

Fate Of Heavy Metals During Municipal Solid Waste Incineration In Shanghai

Impacts of wet treatment on leaching toxicity of municipal solid waste incineration bottom ash

Physical and Chemical Characterization of Ashes from a Municipal Solid Waste Incinerator in China

LEACHING BEHAVIOR OF HEAVY METALS FROM MSWI FLY ASH

Leaching Behavior of Pb and Zn in Air Pollution Control Residues and Their Modeling Prediction.

Variation of the Phytotoxicity of Municipal Solid Waste Incinerator Bottom Ash on Wheat (triticum Aestivum L.) Seed Germination with Leaching Conditions

Immobilization of Heavy Metals from MSWI Fly Ash Using a Novel Cementitious Material: Long-term Leaching Behavior and Mechanism

Mineralogical Characterization of Municipal Solid Waste Incineration Bottom Ash with an Emphasis on Heavy Metal-Bearing Phases.

Leaching behavior and comprehensive toxicity evaluation of heavy metals in MSWI fly ash from grate and fluidized bed incinerators using various leaching methods: A comparative study

Leaching optimization of municipal solid waste incineration ash for resource recovery: A case study of Cu, Zn, Pb and Cd

Effect of Weathering Treatment on the Fractionation and Leaching Behavior of Copper in Municipal Solid Waste Incinerator Bottom Ash