Q-switched mode-locked fiber laser based on the pump modulation technique
Dongdong Han,Yani Chen,Ruotong Guo,Boyuan Zhang,Tiantian Li,Kaili Ren,Yipeng Zheng,Lipeng Zhu,Lei Liang,Zhanqiang Hui
DOI: https://doi.org/10.1016/j.infrared.2024.105210
IF: 2.997
2024-02-07
Infrared Physics & Technology
Abstract:We demonstrate a stable Q-switched mode-locked (QML) erbium fiber laser using pump modulation techniques. A continuous-wave mode-locked operation is realized at a direct current pumping driver current. Stable QML pulses are generated when a modulation signal (square wave signal) is injected into the pump driver. As the parameters of the modulation signal (duty cycle or amplitude) are varied, the time characteristics of the Q-switched pulse envelope can be adjusted. With the duty cycle of the modulation signal increased from 90 % to 99 %, the pulse envelope repetition rate was increased from 34.5 to 43.47 kHz, while the time width of the envelope was reduced from 28 to 23 μs. As the amplitude of the modulation signal increased from 0.7 to 1.2 V, the pulse envelope repetition rate increased from 35.7 to 58.8 kHz, while the time width of the pulse envelope decreased from 27 to 17 μs. The formation mechanism could be attributed to the change in the intensity of gain saturation and saturable absorption in the cavity caused by pump modulation. These alterations affect the duration needed to accumulate sufficient cavity energy and thus affect the temporal parameters of the pulse. This study proposes an effective method for generating QML pulses.
optics,physics, applied,instruments & instrumentation