Abstract:Greatly improving the energy of a single mode-locked pulse while ensuring the acquisition of the width of short pulses will contribute to the application of mode-locked pulse in basic research, such as precision machining. This report has investigated a Q-switched and mode-locked (QML) erbium doped ring fiber laser based on the nonlinear polarization rotation (NPR) technology and a mechanical Q-switched device. Without the working of the mechanical Q-switched device, the fiber laser exported the continuous-wave mode-locked (CWML) pulse, with a width of 212.5 ps, and a repetition frequency of 81.97 MHz. For the CWML operation, the maximum output average power is 25.7 mW, and the energy is only 0.31 nJ. For the QML operation, 18.03 mW average power is achieved at the Q-switching frequency of 100 Hz. The energy of the QML pulse is increased by over 1100 times to 360.6 nJ. The width of the QML pulse is 203.1 ps measured by an autocorrelation curve, with the time-band product (TBP) being 0.598. The power instability is 0.5% (RMS) and 0.7% (RMS), respectively, for CWML and QML operation within 120 min. Furthermore, the spectral signal-to-noise ratio is about 60 dB. For the QML operation, the power instability is 0.48% (RMS) within 60 s and 0.37% (RMS) within 10 s. After frequency stabilization, the frequency fluctuation is ±100 Hz in the long-term of 1200 s, with the frequency stability (FS) calculated to be 2.44 × 10−6. It indicates that the QML fiber laser has good power stability and frequency stability.

Passively Q-switched mode-locked thulium-doped fiber laser using nonlinear polarization rotation technique

Q-switched mode-locking in an erbium-doped femtosecond fiber laser based on nonlinear polarization rotation

Thulium-doped fluoride mode-locked fiber laser based on nonlinear polarization rotation

Q-switched mode-locked fiber laser based on the pump modulation technique

All-fiber low threshold tunable multimode Q-switched mode locked fiber laser using a few mode Er-doped fiber

Passively Q-Switched and Mode-Locked Er3+-Doped Ring Fiber Laser with Pulse Width of Hundreds of Picoseconds

Q-switching and mode locking pulse generation from an all-fiber ring laser by intermodal acousto-optic bandpass modulation

Q-switched Noise-Like Pulse in a Tm-doped Fiber Laser

Evolutions of Q-switched mode-locked square noise-like pulse with different cavity lengths

Hybrid Mode-Locked 2μm Fiber Laser Based on Nonlinear Polarization Rotation and Semiconductor Saturable Absorber Mirror

Dual-color Q-switched mode-locking in an Erbium-doped fiber laser

Q-switched Mode-Locking Femtosecond All-Fiber Laser Based on Er3+/Yb3+ Codoped Phosphate Fiber

All Polarization-maintaining Passively Mode-locked Ytterbium-doped Fiber Lasers, Behavior under Two Different Cavity Configurations

All-Polarization Maintaining Noise-Like Pulse From Mode-Locked Thulium-Doped Fiber Laser Based on Nonlinear Loop Mirror

Generation of bright-dark pulses in a Q-switched thulium-doped fiber laser by using 8-HQCdCl2H2O

976-nm pulse-type switchable all-fiber mode-locked laser based upon nonlinear multimode interference

Er-doped mode-locked fiber lasers based on nonlinear polarization rotation and nonlinear multimode interference

Passively Q-Switched Laser with Single Longitudinal Mode Based on the Frequency Selection of Grating and F-P Etalon in Twisted-Mode Folded Cavity

Passively mode-locked thulium-doped all-fiber laser based on low V number fiber bending

1.7 µm gain-switched and mode-locked hybrid Tm-Ho codoped fiber laser signal generation and optimization

Wavelength-Switchable 2 μm Single-Longitudinal-Mode Thulium-Doped Fiber Laser Based on Dual-Active Cavity and DLTCTR