1-, 1.5-, and 2-Μm Fiber Lasers Q-Switched by a Broadband Few-Layer MoS2 Saturable Absorber
Zhengqian Luo,Yizhong Huang,Min Zhong,Yingyue Li,Jianyu Wu,Bin Xu,Huiying Xu,Zhiping Cai,Jian Peng,Jian Weng
DOI: https://doi.org/10.1109/jlt.2014.2362147
IF: 4.7
2014-01-01
Journal of Lightwave Technology
Abstract:We propose and demonstrate 1, 1.5, and 2 m passively Q-switched fiber lasers by exploiting a few-layer Molybdenum sulfide (MoS 2 ) polymer composite as broadband saturable absorber (SA), respectively. The few-layer MoS 2 nanosheets are prepared by the liquid-phase exfoliation method, and are composited with polyvinyl alcohol (PVA). The PVA-MoS 2 film is sandwiched between two fiber ferrules to form the fiber-compatible SA. The few-layer MoS 2 not only shows good transparency from ultraviolet to mid-infrared spectral region, but also possesses the nonlinear saturable absorption. The modulation depth and saturation optical intensity of the PVA-MoS 2 film are measured to be 1.6% and 13 MW/cm 2 at 1566 nm by the balanced twin-detector technique, respectively. By further inserting the filmy PVA-MoS 2 SA into the cavities of Yb-, Er- and Tm-doped fiber lasers, we achieve stable Q-switching operations at 1.06, 1.56, and 2.03 m, respectively. The output characteristics of the Q-switched pulses at the three wavelengths have been investigated, respectively. The MoS 2 -based Q-switching enables the large pulse energy of ~1 J with a pulse width of 1.76 s. This is, to the best of our knowledge, the first demonstration of MoS 2 -based Q-switched fiber lasers in a wide wavelength range (from 1 to 2 m). Our results experimentally confirm that the new-type 2-D material, few-layer MoS 2 , is a promising broadband SA to Q-switch fiber lasers covering all major wavelengths from near- to mid-infrared region.