Controlled placement of electrodes in an ore-smelting furnace and its effect on the reaction zone

DOI: https://doi.org/10.1007/s11015-024-01684-8

2024-06-05

Metallurgist

Abstract:The paper discusses specifics of the process of carbothermic reduction of metallurgical silicon in ore-smelting furnaces. The reaction zone represents a heating area for the charge materials, formed around the electrodes in all electric furnaces, and facilitates the release of thermal energy by passing electric current through a resistance and/or by creating an electric arc, change in the aggregate state of the loaded materials (e.g., quartzite, bituminous coal, needle coke), and a complex of chemical reactions that occur within such materials. When properly controlled, the operating conditions of the ore-smelting furnace provide optimal specific performance relative to specific power consumption. However, in case of deviations, such as high or low placement of the electrodes, excess or lack of reducing agent in the charge material, furnace throat level being too high or too low relative to technical guidelines, electrode voltage imbalance, etc., the furnace performance can be significantly reduced due to a non-conformant granulometric composition. If the furnace is operated with such deviations for extended periods of time, an emergency shutdown may occur. If the power generated at the electrode is insufficient, the reaction zone becomes significantly narrower, this leads to a change in the rate of chemical reactions. The excessive power levels, on the other hand, may cause intensive entrainment of microsilica along with the formation of blowholes capable of disabling water-cooled panels or shutting down the furnace transformer due to an overload. The location of the reaction zone in the furnace space plays a key role in ensuring effective operation of the ore-smelting furnace. Shifting of the reaction zone upward or downward may result in the grade drop of metallurgical silicon and reduced performance of the furnace, which will subsequently increase the product cost.

metallurgy & metallurgical engineering