Abstract:Good gas permeability is an essential factor for the smooth operation and high performance in the lower part of the blast furnace. Under the present low carbon blast furnace smelting conditions, the coke layer is thinner, and the proportion of the molten metal in the coke layer is significantly higher, resulting in a major reduction in gas permeability, which seriously affects blast furnace operations. Also, the lower thickness of the coke layer weakens the process of solid-liquid carbon dissolution when the molten iron passes through the coke layer, which reduces the carbon content of the molten iron and further deepens the erosion of the refractory by the unsaturated molten iron. The carbon dissolution in the molten iron in a blast furnace core was measured by a high-temperature vacuum wettability test tool that analyzed the interface wetting activity between Fe−C melts with specific carbon mass fraction (3.8%, 4.3%, 4.8%) and 99.9% of high temperatures graphite plates. Besides, the scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS) were used to analyze the graphite substrate’s carburizing morphology and carburizing distances. The results show that, with the increase of carbon content, the interface contact angle becomes bigger. The contact angle decreases with time, and eventually reaches a steady-state during the melting process, and the Fe−C melt with saturated carbon cannot be wet. The scanning electron microscopy analysis shows that a spherical cap-like depression is created by a cross-section of the Fe−C melt and the graphite substrate, and the radius and volume of the depression decrease with increasing carbon content. The study of the EDS scanning analysis shows that the amount of dissolved carbon atoms in the graphite substrate penetrates the Fe−C melt and decreases with increasing initial carbon concentration. The smaller the carburizing effect, the better the wetting is conducive to carbon mass transfer. It is found that by measuring carburizing of the carbon atoms in the graphite substrate into the Fe−C melt by calculating the surface energy reduces the surface energy between the two. Thus, the surface tension decreases and the melt spreads slowly with contact angle gradually decreasing during melting.

Influence of Interface Electric Field on Interaction Between Molten Iron and Refractory Interface

Influence of Interface Electric Field on Wettability Between Molten Iron and Submerged Entry Nozzle Interface

Wetting and Spreading Behavior of Molten Iron in Contact with Graphite Substrate: Interfacial Effects

Controlling the Electric Field Characteristics to Suppress the Clogging and Corrosion of the Continuous Casting Nozzle

Interface Wetting Behavior Between Iron and Coke During the Carbon Dissolution Process in a Blast Furnace

Intervening Interfacial Reaction Between Refractory and Rare Earth-Bearing Molten Steel by Pulsed Electric Current to Inhibit the Clogging of Submerged Entry Nozzle

Influence Factors of Aluminum–Slag Interfacial Reaction under Electric Field

Interfacial Phenomenon and Marangoni Convection of Fe–C Melt on Coke Substrate under in Situ Observation

Influence of Pulse Current on Inclusion Properties of Alumina in Molten Steel

Investigation of the erosion mechanism of the mold flux containing rare earth oxide on the submerged entry nozzle affected by an external electric field

Interfacial reaction behavior in blast furnace and analysis of influence mechanism

Influence of applied electric field on atom diffusion behavior and mechanism for W/NiFe interface in diffusion bonding of Steel/NiFe interlayer/W by spark plasma sintering

Study on the Superlubricity Behavior of Ions under External Electric Fields at Steel Interfaces

The dissolutive wetting behavior between liquid iron and carbonaceous materials: Experiment and ReaxFF molecular dynamics simulation

Reaction mechanism between Al2O3–MgO refractory materials and rare earth high-carbon heavy rail steel

Dynamic interaction of refractory and molten steel: Corrosion mechanism of alumina-magnesia castables

Molecular dynamics simulation study on the wetting behavior of liquid iron and graphite

Effect of Current Frequency on Droplet Evolution During Magnetic-Field-Controlled Electroslag Remelting Process Via Visualization Method

Dynamic mass variation and multiphase interaction among steel, slag, lining refractory and nonmetallic inclusions: Laboratory experiments and mathematical prediction

Explore on the Mechanism of Action between Al2O3–SiO2 Refractory Materials and Rare Earth High Carbon Heavy Rail Steel

Effect of water vapour on the interface reaction between carbon brick and molten iron in blast furnace hearth