Abstract:The iron element in electric arc furnace (EAF) slag is extremely difficult to recycle due to the low specific magnetic susceptibility of the RO phase (a solid solution of FeO, MgO, CaO, and MnO). Landfilling EAF slag is strictly forbidden for environmental consideration because of poisonous Cr6+ leaching. The original RO phase could be transformed to a spinel structure, whose specific magnetic susceptibility is much higher than that of other minerals, through hot modification, resulting in significantly increased iron recovery by magnetic separation. Precipitation of spinel crystals encloses chromium, such that iron and chromium could be recovered simultaneously. The chromium in obtained iron concentrates is considerably useful for stainless steel making rather than polluting the environment. As a result, recovering iron and chromium is truly beneficial for cleaner production. Hot modification of EAF slag should be conducted at 1500–1600 °C for at least 60 min to guarantee homogeneous liquid slag. The liquid slag was poured onto an iron mold to obtain modified slag (MS) through air quenching. MS was characterized by thermodynamic analysis, X-ray diffraction, and scanning electron microscopy combined with energy-dispersive spectroscopy to correlate the relationship between mineral structures and iron recovery. The iron recovery rate of MS first increased and then decreased with increasing modifier. It was less than 10% when the modifier addition amount was below 12 wt.%, but it increased rapidly as the modifier addition amount increased from 16 to 24 wt.%, mainly due to spinel formation. The highest iron recovery rate was 81.9% when the modifier amount reached 20 wt.%. Meanwhile, Cr6+ was enriched in the spinel phase but was not observed in other minerals. Industrial tests were performed on-site with the modifier ranging from 12 to 18 wt.% because additional heat was not provided during the tests. Results showed that MS with 18 wt.% modifier addition exhibited an iron recovery rate of 61.0%, much higher than that (34.6%) of the original slag.

Control of slag formation in the electric furnace smelting of ferronickel for an energy-saving production

Enhancing Rotary Kiln-Electric Furnace Process of Saprolitic Laterite from the Viewpoint of Slag Optimization to Minimize Energy Consumption

Artificial Slags with Modulated Properties for Controlled Nickel Dissolution in Smelting Process

An Improved Process for the Production of Low-Carbon Ferromanganese in the Electric Arc Furnace

Separation and Recovery of Iron and Nickel from Low-Grade Laterite Nickel Ore by Microwave Carbothermic Reduction Roasting

Efficient Utilization of Limonite Nickel Laterite to Prepare Ferronickel by the Selective Reduction Smelting Process

Extraction of ferronickel concentrate from laterite nickel ore by reduction roasting-magnetic separation using spent cathode carbon

Evaluating the Effect of MgO/Al2O3 Ratio on Thermal Behaviors and Structures of Blast Furnace Slag with Low Carbon Consumption

Recovery of nickel and iron from ferronickel powder and high nickel matte via the atmospheric leaching-hematite precipitation process

Fe/SiO2 Ratio on the Properties, Microstructure and Fe-Containing Phases of Nickel Matte Smelting Slag

Behavior of chromium in the reduction and smelting of high alumina nickel laterite in blast furnace

Phase Equilibria Study of the MgO–CaO–SiO2 Slag System with Ferronickel Alloy, Solid Carbon, and Al2O3 Additions

Iodination volatilization roasting of ferronickel alloys for selectively volatilizing iron and simultaneously obtaining nickel containing powder

Pyro-Hydrometallurgy Routes to Recover Silica from Indonesian Ferronickel Slag

Structure and adaptability of FexO-SiO2-MgO-15 wt% CaO-0.026 wt% NiO slag with the Fe/SiO2 mass ratio of 1.2 in flash matte smelting

Nonisothermal Crystallization, Growth, and Shape Control of Magnetite Crystals in Molten Nickel Slag During Continuous Cooling

Effects of direct reduction process on the microstructure and reduction characteristics of carbon-bearing nickel laterite ore pellets

Experimental Determination of the Main Parameters of the Refining Process of Rough Ferronickel, Obtained by Iron-Chromium-Nickel Selective Reduction

Effect Of Roasting Temperature On Phase Transformation In Co-Reduction Roasting Of Nickel Slag

Analysis of the melting process of carbon-bearing pellets in iron bath, slag bath and graphite crucible

Novel method for improving iron recovery from electric arc furnace slag: on-site hot modification