Cold crystallization kinetics of slag from the joint smelting of oxidized nickel and sulfide copper ores
Klyushnikov, Alexander,Gulyaeva, Roza,Pikalov, Sergey
DOI: https://doi.org/10.1007/s10973-022-11429-x
IF: 4.755
2022-06-24
Journal of Thermal Analysis and Calorimetry
Abstract:The cold crystallization kinetics of the glass-crystal composition (90.3 vol% of glass) made of slag from the joint smelting of oxidized nickel and sulfide copper ores were studied in the temperature range from 876 to 1003 °C with a heating rate of 5–20 °C·min–1 in an inert atmosphere (the elemental composition of slag is mass%: 0.09 Ni, 0.12 Cu, 0.02 Co, 0.2 Zn, 15.7 Fe, 0.2 S, 50.0 SiO2, 14.2 MgO, 4.8 Al2O3, and 9.4 CaO; particle size < 0.125 mm). XRD data showed that, depending on heating rate, different combinations of crystalline phases could be released in the glass matrix, such as cummingtonite, SiO2 polymorphs, epistilbite, rankinite, wadsleyite, merwinite, and alite. The glass content has been reduced to 54.2 mass% during cold crystallization. The cold crystallization kinetic parameters were estimated by treating the non-isothermal DSC data by Kissinger (classical and advanced), Ozawa, and Augis–Bennett methods. The apparent activation energy, Avrami exponent, and dimensionality of crystal growth are found to be 659 kJ·mol–1, 2.8, and 1.8, respectively. The process is dominated by bulk nucleation with an increase in the number of nuclei under conditions of combined two- and one-dimensional crystal growth. During cold crystallization, 1.3 times more volume of crystals are found to release than when the melted slag is cooled, and there is no need for fine grinding of the raw material. Annealing of granular slag could be a more efficient method of producing glass–ceramics based on the FeOx–CaO–MgO–Al2O3–SiO2 system than the petrurgic method.
chemistry, physical, analytical,thermodynamics