Abstract:Good gas permeability is an essential factor for the smooth operation and high performance in the lower part of the blast furnace. Under the present low carbon blast furnace smelting conditions, the coke layer is thinner, and the proportion of the molten metal in the coke layer is significantly higher, resulting in a major reduction in gas permeability, which seriously affects blast furnace operations. Also, the lower thickness of the coke layer weakens the process of solid-liquid carbon dissolution when the molten iron passes through the coke layer, which reduces the carbon content of the molten iron and further deepens the erosion of the refractory by the unsaturated molten iron. The carbon dissolution in the molten iron in a blast furnace core was measured by a high-temperature vacuum wettability test tool that analyzed the interface wetting activity between Fe−C melts with specific carbon mass fraction (3.8%, 4.3%, 4.8%) and 99.9% of high temperatures graphite plates. Besides, the scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS) were used to analyze the graphite substrate’s carburizing morphology and carburizing distances. The results show that, with the increase of carbon content, the interface contact angle becomes bigger. The contact angle decreases with time, and eventually reaches a steady-state during the melting process, and the Fe−C melt with saturated carbon cannot be wet. The scanning electron microscopy analysis shows that a spherical cap-like depression is created by a cross-section of the Fe−C melt and the graphite substrate, and the radius and volume of the depression decrease with increasing carbon content. The study of the EDS scanning analysis shows that the amount of dissolved carbon atoms in the graphite substrate penetrates the Fe−C melt and decreases with increasing initial carbon concentration. The smaller the carburizing effect, the better the wetting is conducive to carbon mass transfer. It is found that by measuring carburizing of the carbon atoms in the graphite substrate into the Fe−C melt by calculating the surface energy reduces the surface energy between the two. Thus, the surface tension decreases and the melt spreads slowly with contact angle gradually decreasing during melting.

Application of High‐ and Low‐Reactivity Cokes in Hydrogen‐Rich Blast Furnaces

Gasification of iron coke and cogasification behavior of iron coke and coke under simulated hydrogen-rich blast furnace condition

Interface Wetting Behavior Between Iron and Coke During the Carbon Dissolution Process in a Blast Furnace

Evolution and process analysis of the hearth activity in hydrogen-rich blast furnace

Effect of Mixed Charging of Nut Coke and Sinter on Hydrogen-Rich Smelting Process of Blast Furnace

Effect of CO–CO2 and H2–H2O on the reduction degree of fluxed pellets: reduction mechanism within hydrogen-rich blast furnace

Highly Reactive Coke Made from Low-rank Coal: Relationship Between Thermal Properties and Multilevel Structure

Evolution of Coke Microstructure and Metallurgical Properties During Graphitization in a Blast Furnace

The solution-loss reaction of cokes with different reactivity and lump ores during reductive coupling

Theoretical insight into the competitive effect of CO2 and additive H2O in coke gasification

Kinetics and mechanisms of coke and sinter on the coupling reaction to evaluate the integrated effects of coke solution loss reaction on blast furnace processes

Coupled Typical Coke Gasification and Sintering Ore Reduction in CO–N2–H2

Study on the High-Temperature Interaction between Coke and Iron Ores with Different Layer Thicknesses

Study on the reduction of Fe2O3 pellets by CO-CO2 and H2-H2O: Reaction kinetics and pore network model

Softening and melting performance of mixed burden under the simulated hydrogen-rich blast furnace atmosphere

Study on solution loss reaction of high reactivity coke mixed with iron ore powders

A technical review on coke rate and quality in low-carbon blast furnace ironmaking

Catalytic Effect of Alkali Metals on the Gasification Dissolution Reaction and Deep Reaction Behavior of Metallurgical Cokes.

Production of highly reactive cokes by adding alkali metals and alkaline earth metals and their effect mechanism

Investigation of reduction behavior of various iron ores in a hydrogen-rich reducing atmosphere

Softening and melting behaviors of ferrous burden in hydrogen-rich blast furnace cohesive zone