Abstract:Till now electron microscopy techniques have not been used to evaluate the plasma-target interactions undergone during the magnetron sputtering process. The destructive nature of this interaction severely alters the target microstructure. Utilising quantitative microscopy techniques can shed light on the complex plasma and solid-state processes involved which can ultimately lead to improved functional thin film deposition. As a representative functional material, aluminium-doped-zinc oxide (AZO) is an upcoming alternative to conventional transparent electrode wherein the process optimisation is of great importance. In this paper, we evaluate the pre- and post-sputter field emission scanning electron microscopy (FESEM) data for ceramic AZO target fabricated at three final sintering temperatures (1100°C, 1200°C and 1300°C). In all cases, grain boundaries are merged in addition to a visible reduction in the secondary phases which makes segmentation-based image analysis challenging. Through surface statistics (i.e. fractal dimension, autocorrelation length, texture aspect ratio and entropy) as a function of magnification we can quantify the electron microscopy image of the microstructure. We show that the plasma-microstructure interaction leads to an increase in autocorrelation length, texture aspect ratio and entropy for the optimum AZO ceramic sputtering target sintered at 1200°C. Furthermore, a maximum reduction in fractal dimension span (as determined by exponential regression) is also observed for 1200°C. In addition to the evaluation of plasma effects on sintering, our approach can provide a window towards understanding the underlying thin film growth mechanisms. We believe that this technique can be applied to the defect characterisation of a wide range of polycrystalline ceramic sputtering targets (e.g. ITO, CZTS, GAZO and so on) with the ultimate goal of improving the magnetron sputtering process and the resulting functional thin film. LAY DESCRIPTION: Magnetron sputtering allows scientists to make functional thin films on the order of the nanoscale. In this technique, atoms are plucked from a 'target' then placed onto a substrate forming a thin nanometric film: all thanks to magnets, a special power supply and the fourth state of matter (plasma). Understanding what is going on and how to make a 'good' thin film is important for making better light emitting diodes, solar cells and light sensors. Scientists use electron microscopy to see what is going on in the microstructure of the sputtered thin films to fine tune the sputtering recipe. Here, for the first time, we have applied electron microscopy to see the surface of the microstructure before and after magnetron sputtering. This will help us understanding the plasma-microstructure interaction allowing us to make more informed decisions when fine-tuning the sputtering process to get improved thin films. This is a case study of aluminium-doped zinc oxide (AZO) target that could potentially replace indium tin oxide (ITO), which is widely used as a transparent electrode in devices involving light and electricity. In this case, improved characteristics would be lower electrical resistivity and higher transmission of light. We show that it is possible to use a mathematical description (e.g. the fractal dimension) of the scanning electron microscopy picture to show a link between the target surface and the functional properties. Simple explanation of fractal dimensions by Sixty Symbols ○ https://www.youtube.com/watch?v=cmBljeC79Ls Experimental demonstration of magnetron sputtering by The Thought Emporium ○ https://www.youtube.com/watch?v=Cyu7etM-0Ko Introductory video on magnetron sputtering by Applied Science ○ https://www.youtube.com/watch?v=9OEz_e9C4KM Demonstration of AZO target fabrication and sputtering by Pradhyut Rajjkumar ○ https://www.youtube.com/watch?v=kTLaTJfNX3c Simple explanation of a DIY SEM by Applied Science ○ https://www.youtube.com/watch?v=VdjYVF4a6iU.

Fabrication of smooth SAC305 thin film via magnetron sputtering

Fabrication and characterization of magnetron sputtered SAC305 thin films

Numerical modeling and optimization of fillet height of reinforced SAC305 solder joint in an ultra-fine capacitor assembly

Modeling of Smoothening Effect on Morphologies of Annealed Submicron Nickel Particles Used for Electrically Conductive Adhesives

Effects of technological parameters in magnetron sputtering process on properties of metallized films

Metallization of SMD Inductor of Ferrite Ceramics by Magnetron Sputtering

Effects of Surface Finish on Sn-3.0Ag-0.5Cu Solder Joint Microstructure and Strength

Tin Multilayer‐Aided SAC305‐Based Lead‐Free Solder Joint Interface with Cu: An Investigation of the Stress Distribution by Finite Element Analysis and Nanoindentation Studies

Dynamic wetting and spreading mechanisms of SAC305 with added Au elements in the laser jet weld ball bonding process

Fabricacion de un magnetron sputtering para deposito de peliculas nanometricas magneticas

A study on protection behavior of inorganic coating prepared by magnetron sputtering technology for electrochemical migration corrosion failure of SAC305 alloy

Facilitating Complex Thin Film Deposition by Using Magnetron Sputtering: A Review

High-rate deposition of ultra-thick silver film by hollow cathode magnetron sputtering

Effects of immersion silver (ImAg) and immersion tin (ImSn) surface finish on the microstructure and joint strength of Sn-3.0Ag-0.5Cu solder

Improvement of titanium film uniformity by magnetron sputtering with electromagnetic coil design

The Study on Reliability of Ni-coated Graphene Doped SAC305 Lead-Free Composite Solders under High Current-Density Stressing

Fabrication and Characteristics of SnAgCu Alloy Nanowires for Electrical Connection Application

Optimizing the Thickness Uniformity of Magnetron Sputtering Deposited Films on a Large-Scale Curved Workpiece Surface

Quantitative SEM characterisation of ceramic target prior and after magnetron sputtering: a case study of aluminium zinc oxide

Magnetron Sputtering of Transition Metal Nitride Thin Films for Environmental Remediation

Effect of thickness in the SAC 305 plated layer on the interfacial reaction and mechanical properties of the CCSB joint assembled onto the OSP surface finished FR-4 PCB board