Abstract:Addressing the issue of inadequate temperature tolerance in traditional polymers, in this study, we successfully executed a one-step synthesis of intelligent–responsive polymers which have excellent adaptability in water–gas alternating displacement scenarios. Utilizing the fatty acid method, we produced OANND from oleic acid (OA) and N,N-dimethyl-1,3-propanediamine (NND). Upon testing the average particle size in the aqueous solution both prior and subsequent to CO2 passage, it became evident that OANND assumes the form of a small-molecule particle in the aqueous phase, minimizing damage during formation. Notably, upon CO2 exposure, it promptly organizes into stable micelles with an average size of 88 nm and a relatively uniform particle distribution. This unique characteristic endows it with a rapid CO2 response mechanism and the ability to form a highly resilient gel. In the exploration of viscoelastic fluids, we observed the remarkable behavior of the AONND aqueous solution when CO2/N2 was introduced. This system displayed repeatable transitions between aqueous and gel states, with the highest viscosity peaking at approximately 3895 mPa·s, highlighting its viscosity reversibility and reusability properties. The rheological property results that we obtained indicate that an elongated micellar structure is present in the solution system, with the optimal concentration ratio for its formation determined as 0.8, which is the molar ratio of the OANND-NaOA system. In the sealing performance tests, a 1.0 wt% concentration of the gel system exhibited excellent injectability properties. At 80 °C, this gel effectively reduced the permeability of a sand-filled model to 94.5% of its initial value, effectively sealing potential leakage paths or gas fluxes. This remarkable ability to block leakage paths and reduce seepage capacity highlights the material's superior blocking effect and erosion resistance properties. Furthermore, even at a temperature of 90 °C and an injection pore volume (PV) of 3, this plugging system could reduce the permeability of a high-permeability sand-filled model to over 90% of its initial value.

Development and Characterization of CO 2 -Responsive Intelligent Polymer Sealant

Synthesis and CO2 Capture Behavior of Porous Cross-Linked Polymers Containing Pendant Triazole Groups

A novel double‐doped polymer‐modified cement‐based sealant to enhance borehole seals and reduce methane emissions

Selective Permeation of CO2 Through a Composite Membrane with a Separation Layer of 2-N,n-dimethyl Aminoethyl Methacrylate and Acrylic Acid Copolymer

Development and performance evaluation of hydrophobic association plugging agents for sealing formation prior to cementing

CO2‐Responsive Copolymers for Membrane Applications, Synthesis, and Performance Evaluation

The Use of an Advanced Intelligent–Responsive Polymer for the Study of Dynamic Water–Carbon Dioxide Alternating Displacement

Research on Crack Sealing Performance of Polymer Microsphere/Hydrogel Composite System

Systematic Experimental Investigation on In-Situ Self-Adaptive Sealing Property of Composite Pressure-Activated Sealant for Curing Minor Tubular Leaks

Experimental Study on the Optimization of Polymer-Modified Cement-Based Composite Sealing Materials and Mechanical Properties and Permeability of Cemented Coal Bodies

Engineering Porous Organic Polymers for Carbon Dioxide Capture

Synthesis, investigation of temperature and salt resistant polyacrylamide microspheres used for deep sealing and profile control and function strengthening mechanism

Performance and enhanced oil recovery efficiency of an acid-resistant polymer microspheres of anti-CO2 channeling in low-permeability reservoirs

A novel dual-network CO 2 -responsive particle gel for mitigating CO 2 channeling and leakage in hydrocarbon recovery and carbon storage

Research on Temperature-Resistant Polymer-Based Nano-SiO2 Composite Sealing Agent

Cohesion Design-Led Tough Sealants with Controllably Dissolvable Properties

Stability mechanism of controlled acid-resistant hydrophobic polymer nanospheres on CO 2 foam

Research on composite municipal solid waste incineration bottom ash and granulated blast furnace slag based geopolymers with sodium alginate for sealing coal seam gas drainage boreholes

A novel nano-grade organosilicon polymer: Improving airtightness of compressed air energy storage in hard rock formations

Polymer-Grafted Porous Silica Nanoparticles with Enhanced CO 2 Permeability and Mechanical Performance

Laboratory evaluation of a controllable self-degradable temporary plugging agent in fractured reservoir