Abstract:With the long-term water-flooding development of the reservoir, the non-homogeneity of the formation is increasing and the reservoir environment is deteriorating; the microspheres used for deep plugging have shown disadvantages, such as poor temperature and salt resistance and faster expansion. In this study, a polymeric microsphere was synthesized that is resistant to high temperature and high salt and can achieve slow expansion and slow release for deep migration. P(AA-AM-SA)@TiO2 polymer gel/inorganic nanoparticle microspheres were prepared by reversed-phase microemulsion polymerization using acrylamide (AM) and acrylic acid (AA) as monomers, 3-methacryloxypropyltrimethoxysilane (KH-570)-modified TiO2 as the inorganic core, and sodium alginate (SA) as a temperature-sensitive coating material. Through single-factor analysis of the polymerization process, the optimal synthesis conditions were determined as follows: the oil(Cyclohexane)-water volume ratio was 8:5, the emulsifier mass ratio (Span-80:Tween-80) was 3:1 (10 wt% of the total system amount), the stirring speed was 400 r/min, the reaction temperature was 60 °C, and the initiator (ammonium persulfate and sodium bisulfite) dosage was 0.6 wt%. The size of the dried polymer gel/inorganic nanoparticle microspheres prepared by the optimized synthesis conditions was 10~40 μm with uniform particle size. The observation of P(AA-AM-SA)@TiO2 microspheres reveals that the Ca elements are uniformly distributed on the microspheres, and FT-IR indicates that the synthesized product is the target product. TGA shows that the polymer gel/inorganic nanoparticle microspheres have better thermal stability after the addition of TiO2, with a larger mass loss at 390 °C, which can adapt to the medium-high permeability reservoir environment. The thermal and aqueous salinity resistance of the P(AA-AM-SA)@TiO2 microspheres was tested, and the cracking temperature of P(AA-AM-SA)@TiO2 microsphere temperature-sensitive material was 90 °C. It still has favorable water absorption and swelling performance under the sodium salt concentration of 2.5 × 104 mg/L and can tolerate calcium salt up to 2.0 × 104 mg/L. Plugging Performance Test results show that the microspheres have good injectability between the permeability of 1.23 and 2.35 μm2 and good plugging effect near the permeability of 2.20 μm2. At high temperature and high salinity, P(AA-AM-SA)@TiO2 microspheres have a remarkable effect on profile control and water shutoff, the plugging rate reaches 95.3%, and the oil recovery rate is increased by 12.89% compared with water flooding, achieving the effect of slow swelling and slow release.

Synthesis, investigation of temperature and salt resistant polyacrylamide microspheres used for deep sealing and profile control and function strengthening mechanism

JIN Zhiyuan1,2, SHAN Guorong2,3, PAN Pengju2,3

Preparation and Performance Evaluation of Self-Cementing Nanoscale Polymeric Microspheres with Salt and Temperature Tolerance

Investigation of a hydrophobically associating polymer’s temperature and salt resistance for fracturing fluid thickener

High-Temperature Resistance Water-Soluble Copolymer Derived From Acrylamide, Dmdaac, And Functionalized Sulfonamide For Potential Application In Enhance Oil Recovery

Preparation and Property of 2-Acrylamide-2-methylpropanesulfonic Acid/Acrylamide/Sodium Styrene Sulfonate As Fluid Loss Agent for Oil Well Cement

Preparation and profile control evaluation of core‐shell structure and surface‐hydrophobic modified polyacrylamide microsphere

Modified Polyacrylamide Containing Phenylsulfonamide and Betaine Sulfonate with Excellent Viscoelasticity for EOR

Rheological properties and enhanced oil recovery performance of a novel sulfonate polyacrylamide

Effect of AMPS(2-acrylamido-2-methylpropane sulfonic acid) content on the properties of polymer gels

Synthesis and Evaluation of Temperature-Resistance and Salt-Tolerant Copolymer(am-Amps-dmdaac-nea) As Clay Stabilizer

Fracturing Fluid Polymer Thickener with Superior Temperature, Salt and Shear Resistance Properties from the Synergistic Effect of Double-Tail Hydrophobic Monomer and Nonionic Polymerizable Surfactant

Hydrophobically Associating Polyacrylamide Derivatives with Double Bond for Enhanced Solution Properties

Synthesis and properties of AM/AMPS/MMA and cationic monomer copolymer flooding agent

Synthesis and Performance Evaluation of Alginate-Coated Temperature-Sensitive Polymer Gel Microspheres

Synthesis and evaluation of a water-soluble acrylamide binary sulfonates copolymer on MMT crystalline interspace and EOR

Synthesis and Characterization of a Resin/Acrylamide-2-acrylamide-2-methylpropane Sulfonate-Diallyl Dimethyl Ammonium Chloride-<i>N</i>-vinyl-2-pyrrolidinone Polymer Microcapsule Gelling Agent for Oil and Gas Field Transformation

Preparation of cationic polyacrylamide microsphere emulsion and its performance for permeability reduction

Synthesis, Characterization, and Flocculation Performance of Anionic Polyacrylamide P (AM-AA-AMPS)

Synthesis and performance evaluation for the P(AM/NVP/N-MAM)as enhanced oil recovery chemical

Synthesis and performance of a water-soluble copolymer AM/AA/APEG/NANB