Abstract:High-volume-fraction SiC/Al (HVF-SiC/Al) composites have a wide range of applications in aerospace, optics, automotive and electronic packaging. However, because the hardness, brittleness and wear resistance increase with the increase in the volume fraction, it is difficult for traditional methods such as machining, to process HVF-SiC/Al composites to complex components. Therefore, in this paper, a novel method of the hybrid additive manufacturing is proposed to fabricate complex-structures SiC/Al composite parts. The effect of polymer infiltration and pyrolysis (PIP) on microstructure and properties of HVF-SiC/Al composites is investigated. The results show that the mechanical properties of the SiC preforms can be effctively enhanced by the PIP process, and this enhancement makes the SiC preforms meet the conditions for subsequent vacuum-pressure infiltration. The mechanical property of HVF-SiC/Al composites show a huge increase when in creasing the volume fraction of SiC. In particular, the flexural strength of HVF-SiC/Al composites increased from 202.28 MPa to 380.87 MPa, and the coefficient of thermal expansion (CTE) has also been reduced from 11.80 to 6.28 × 10 -6 /K, when the volume fraction of SiC increases from 42 to 80 vol%. For optimise the PIP process in the future, three theoretical models are used to predict the relationship between the CTE and the volume fraction of SiC. The results show that the experimental data are more consistent with the predicted values based on the Kerner's model, but deviate from the Rule-of-mixture (ROM) and Turner's models. Importantly, the complex-structures SiC/Al composite parts was successfully fabricated by this hybrid additive manufacturing.

Fabrication of high-strength Si/SiC composites with low shrinkage rates via vat photopolymerization technology and liquid silicon infiltration

Vatphotopholymerization of large-aperture high performance SiC mirror through multiphase carbon infiltration modification

Optimizing the properties of vat photopolymerization 3D-printed SiC ceramics by multi-infiltration

Preparation of low residual silicon content Si-SiC ceramics by binder jetting additive manufacturing and liquid silicon infiltration

POLYMER-DERIVED SIC CERAMIC WITH TRIPLY PERIOD MINIMAL SURFACE STRUCTURE FABRICATION THROUGH DIGITAL LIGHT PROCESSING

Incorporating Boron Carbide into Fused Silica Imparts Multiple Mechanisms to Facilitate Vat Photopolymerization

Stereolithography-based additive manufacturing of lightweight and high-strength Cf/SiC ceramics

Properties regulation of SiC ceramics prepared via stereolithography combined with reactive melt infiltration techniques

Fabrication of High‐strength Porous SiC‐based Composites with Unidirectional Channels

Controllable reduction of absorbance and two-step reaction for 3D-printed SiC ceramics with micron-level periodic structure

Effect of polymer infiltration and pyrolysis (PIP) on microstructure and properties of high volume fraction SiC/Al composites prepared by a novel hybrid additive manufacturing

Study on Novel Procedure for Complex-shaped SiC Ceramic Components

Direct Ink Writing of Chopped Carbon Fibers Reinforced Polymer-derived SiC Composites with Low shrinkage and High Strength

Enhanced Molding and Mechanical Properties of SiC-based Ceramic Lattice Structures Via Digital Light Processing

Microstructure Evolution and Performance Improvement of Silicon Carbide Ceramics via Impregnation Method

A stereolithographic diamond-mixed resin slurry for complex SiC ceramic structures

Complex SiC-based structures with high specific strength fabricated by vat photopolymerization and one-step pyrolysis

High-strength and low-silicon SiC ceramics prepared by extrusion molding 3D printing

Fabrication and characterization of carbon fiber reinforced SiC ceramic matrix composites based on 3D printing technology

Additive manufacturing of Csf/SiC composites with high fiber content by direct ink writing and liquid silicon infiltration

Additive Manufacturing of Silicon Oxycarbide Ceramics with Minimal Surface Structures