Abstract:Surface stability of Ni-rich NCM cathode material is improved by NTESA precursor.Thermal treatment of NCM cathode material with NTESA forms artificial CEI layer.Artificially embedded CEI layer inhibits electrolyte decomposition during cycling.NTESA-modified NCM cathode exhibits improved cycling retention after 100 cycles.Systematic spectroscopic analyses prove undesired reactions are well suppressed.Layered lithium nickel-cobalt-manganese oxides (NCM) have been highlighted as advanced cathode materials for lithium-ion batteries (LIBs); however, their low interfacial stability must be overcome to ensure stable cycling performance of the cell. In this work, we propose a one-step surface modification method that uses a task-specific precursor, N,N,N,N-tetraethylsulfamide (NTESA), to improve interfacial stability of Ni-rich NCM cathode materials. The unstable surface properties of Ni-rich NCM cathode material are improved by embedding an artificial cathode-electrolyte interphase (CEI) layer on the cathode surface by heat treatment of the Ni-rich NCM cathode material with an NTESA precursor at low temperature. Our material analyses indicate that this approach allows the formation of amine- and sulfone-functionalized CEI layers on the surface of Ni-rich NCM cathode material without changing the layered structure of the cathode material. NTESA-functionalized Ni-rich NCM cathode materials exhibit improved cycling retention after 100 cycles: for example, a cell cycled with a 3.0 NTESA-modified NCM811 cathode presents the highest retention ratio of 88.3%, whereas a cell cycled with a non-functionalized NCM811 cathode suffers from rapid fading of the cycling performance (68.4%). Our additional SEM, XPS, and EIS analyses indicate that electrolyte decomposition is suppressed during electrochemical cycling, thereby leading to smaller increases in the internal resistances. ICP-MS analyses of the cycled anodes also indicate that the NTESA-based artificial CEI layer inhibits the dissolution of transition metal components from the Ni-rich NCM cathode materials, thereby contributing to an improved overall electrochemical performance of the cell.Download : Download high-res image (172KB)Download : Download full-size image

Controlled crystallinity of LiTaO 3 surface layer for single-crystalline Ni-rich cathodes for lithium-ion batteries and all-solid-state batteries

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Structure and Charge Regulation Strategy Enabling Superior Cyclability for Ni‐Rich Layered Cathode Materials

One-Step Synthesis of a Single-Crystal LiNi 0.83 Co 0.11 Mn 0.06 O 2 Cathode with Excellent Electrochemical Properties by Ti 4+ Doping and LiTi 2 O 4 In Situ Chemical Coating Using a Novel Variable Temperature Sintering Process

Both Interface and Bulk Stable LiNi 0.5 Mn 1.5 O 4 Cathodes for High-Energy Li-Ion Batteries

Advantageous Surface Engineering to Boost Single-Crystal Quaternary Cathodes for High-Energy-Density Lithium-Ion Batteries

In-situ construction of a thermodynamically stabilized interface on the surface of single crystalline Ni-rich cathode materials via a one-step molten-salt route

Surface Coating with Li-Ti-O to Improve the Electrochemical Performance of Ni-rich Cathode Material

Mitigating Planar Gliding in Single‐Crystal Nickel‐Rich Cathodes through Multifunctional Composite Surface Engineering

Lanthanum doping and surface Li 3 BO 3 passivating layer enabling 4.8 V nickel-rich layered oxide cathodes toward high energy lithium-ion batteries

Roles of Fast‐Ion Conductor LiTaO 3 Modifying Ni‐rich Cathode Material for Li‐Ion Batteries

Enhanced structure and electrochemical stability of single crystal nickel-rich cathode material by La2Li0.5Co0.5O4 surface coating

High Performance Single-Crystal Ni-Rich Cathode Modification via Crystalline LLTO Nanocoating for All-Solid-State Lithium Batteries

Ta doping and LiTaO3 coating to improve the electrochemical performance of LiNi0.925Co0.03Mn0.045O2 cathode material for lithium ion batteries

Dually-functionalized Ni-rich layered oxides for high-capacity lithium-ion batteries

Dual-modified engineering suppressed the formation of Li-concentration gradient and oxygen vacancies for single-crystal Ni-rich layered cathodes

Nanoscale operation of Ni-Rich cathode surface by polycrystalline solid electrolytes Li3.2Zr0.4Si0.6O3.6 coating

Improvement of electrochemical properties of lithium-rich manganese-based cathode materials by Ta2O5

Surface Coupling between Mechanical and Electric Fields Empowering Ni‐Rich Cathodes with Superior Cyclabilities for Lithium‐Ion Batteries

Surface Encapsulation of Layered Oxide Cathode Material with NiTiO 3 for Enhanced Cycling Stability of Na-Ion Batteries

In Situ Constructing Ultrastable Mechanical Integrity of Single‐Crystalline LiNi0.9Co0.05Mn0.05O2 Cathode by Interior and Exterior Decoration Strategy