Abstract:Hydrophilic silica (SiO2) nanoparticles (average size=7nm), which act as inorganic acids at low pH (<2), were added together with a PEO–PPO–PEO triblock copolymer dispersant to a random disulfonated poly(arylene ether sulfone) copolymer in the potassium salt (SO3−K+) form in order to control permeation and rejection characteristics of the homopolymer. The dispersants (shell) absorbed on the surface of SiO2 nanoparticles (core) formed a distinctive core–shell structure. The PEO units located at the outside of the dispersant formed complexes with SO3−K+ groups of BPS-20 via ion–dipole interactions. These interactions induced a compatible binary system following the Flory–Fox equation associated with glass transition temperature (Tg) depression and prevented extraction of the water-soluble dispersant even under aqueous conditions. The ion–dipole interaction, combined with hydrogen bonding between SiO2 and the dispersant, caused SiO2 nanoparticles to be well distributed within the BPS-20 matrix up to a limit of 1wt.% of SiO2 and minimized the formation of non-selective cavities within the matrix's hydrophilic water channels. The resulting BPS-20_SiO2 nanocomposites showed improved salt rejection and reduced ionic conductivity. These trends are analogous to those of disulfonated copolymer systems, with polar groups creating hydrogen bonding or acid–base complexation with SO3−K+ groups in BPS copolymers. Well dispersed SiO2 nanoparticles in highly water-permeable desalination membranes are expected to result in an increase in salt rejection but very little change in water permeability. The addition of nanoparticles to desalination membranes may offset the permeability-selectivity tradeoff observed in polymer membranes. Above 1wt.%, SiO2 nanoparticles increased both the interchain distance between polymer chains and the water uptake. However, the increased hydrophilicity due to high SiO2 content did not yield improved water permeation of the nanocomposite membranes. The SiO2 nanoparticles acted as barriers, hindering water passage (restrictive diffusion) and lowering water permeability. Meanwhile, acidic hydroxyl groups (OH2+) on the SiO2 surface in the sulfonate matrix led to improved ionic conductivity, but NaCl rejection capability decreased because the concentration of SO3−K+ was diluted by highly absorbed water molecules, resulting in weakened Donnan exclusion. The mechanical properties and chlorine resistance of all BPS-20_SiO2 nanocomposites were comparable to those of BPS-20.

Immobilization of sulfonated polysulfone via 2D LDH nanosheets during phase-inversion: A novel strategy towards greener membrane synthesis and enhanced desalination performance

Porous PVDF membranes containing amphiphilic comblike polysiloxane formed via phase inversion process

Combing Three-Dimensional Water Channels and Ultra-Thin Skin Layer Enable High Flux and Stability of Loose Polyimide/sio2 Nanofiltration Membranes at Low Operating Pressure Via One Step In-Situ Modification

A facile approach to silica-modified polysulfone microfiltration membranes for oil-in-water emulsion separation

Immobilization of Sodium Alginate Sulfates on Polysulfone Ultrafiltration Membranes for Selective Adsorption of Low-Density Lipoprotein

Porous organic polymer nanosheets doped multistage water channel ultrafiltration membrane: Accelerated phase inversion process and in-situ covalent crosslinking strategy

Enhancing thin-film composite polyethersulfone hollow fiber membranes through alkali-induced interfacial polymerization modification for effective separation of monovalent/divalent salts

One-Step Water-Induced Phase Separation Simultaneously Triggering Polymer Solidification and Polyelectrolyte Complexation for Porous Ultrafiltration Membranes

Facile Preparation of Dense Polysulfone UF Membranes with Enhanced Salt Rejection by Post-Heating

Preparation of polysulfone-based nanofiber Janus membrane for membrane distillation containing organic pollutants

Hydrophilic Silica Additives for Disulfonated Poly(arylene Ether Sulfone) Random Copolymer Membranes

Structural and separation evaluation of polysulfone-based loose NF membrane modified with itaconic acid-choline chloride deep eutectic solvent as additive

Thin-Film Composite Membranes Interlayered with Amphiphilic MoS 2 Nanosheets via Controllable Interfacial Polymerization for Enhanced Desalination Performance

Synergistic effects of deep eutectic solvents on the morphology and performance of polysulfone ultrafiltration membranes

Polyelectrolyte Complex Membranes via Salinity Change Induced Aqueous Phase Separation

Sustainable additive manufacturing of polysulfone membranes for liquid separations

Synthesis of robust interface-anchored composite PVA/PSU/epoxy membrane for highly efficient pervaporation in concentrated brine desalination

Bioinspired: A 3D vertical silicon sponge-inspired construction of organic-inorganic loose mass transfer nanochannels for enhancing properties of polyimide nanofiltration membranes

Leveraging Janus Substrates As a Confined "interfacial Reactor" to Synthesize Ultra-permeable Polyamide Nanofilms

Integrating radical polymerization and non-solvent induced phase inversion strategy for functionalized ultrafiltration membrane fabrication

A novel strategy to enhance the desalination stability of FAS (fluoroalkylsilane)-modified ceramic membranes via constructing a porous SiO2@PDMS (polydimethylsiloxane) protective layer on their top