Abstract:Mixed matrix membranes (MMMs) have attracted significant interest in the field of water treatment owing to their capability to integrate the scalability and processability of polymers with the selectivity of fillers. Despite the numerous advantages demonstrated by emerging nanofillers, currently developed MMMs are still limited by such as insufficient hydrophilicity, susceptibility to additive loss, and poor filler compatibility. To address these challenges, we developed a series of polyethersulfone (PES)-based MMMs featuring a hydrophilic surface and multistage water transport channels, thereby minimizing additive loss, and enhancing efficiency in water treatment processes. Through interfacial azo-coupling polymerization, we synthesized a series of hydrophilic and porous two-dimensional sulfonic acid-functionalized porous organic polymer nanosheets (NS-sPOPs) to be used as additives in the MMMs. Owing to the exceptional hydrophilicity and favorable dispersibility of NS-sPOPs in water, the nanosheets influenced phase inversion through an accelerated phase separation process, resulting in the formation of multistage channels. Polyphosphoric acid (PPA) was used for the post-crosslinking treatment of the PES/NS-sPOP membrane. Consequently, the NS-sPOPs were immobilized within the polymer matrix to ensure stable performance in subsequent use. The prepared PES/NS-sPOP membrane exhibited outstanding water permeability (pure water flux) of 493 L·m−2·h−1·bar−1, and a high bovine serum albumin rejection rate of 99.3 %. Furthermore, it exhibits consistent performance throughout a 48 h long-term stability test. Overall, the blending and crosslinking strategy of hydrophilic nanofillers enables the realization of superhydrophilic 2D nanosheet-doped multistage-water-channel MMMs with exceptional permeability and high selectivity for water purification and organic pollutant removal.

Bioinspired: A 3D vertical silicon sponge-inspired construction of organic-inorganic loose mass transfer nanochannels for enhancing properties of polyimide nanofiltration membranes

Combing three-dimensional water channels and ultra-thin skin layer enable high flux and stability of loose polyimide/SiO<sub>2 </sub>nanofiltration membranes at low operating pressure via one step in-situ modification

A Novel Positively Charged Nanofiltration Membrane Formed Via Simultaneous Cross-Linking/quaternization of Poly(m-Phenylene Isophthalamide)/polyethyleneimine Blend Membrane

Designing bioinspired nanofiltration membrane for enhanced water permeance and efficient ion sieving

Bioinspired fabrication of composite nanofiltration membrane based on the formation of DA/PEI layer followed by cross-linking

Porous organic polymer nanosheets doped multistage water channel ultrafiltration membrane: Accelerated phase inversion process and in-situ covalent crosslinking strategy

Synchronous Engineering for Biomimetic Murray Porous Membranes Using Isocyanate

Preparation of high flux organic solvent nanofiltration membrane based on polyimide/Noria composite ultrafiltration membrane

Surface Effect-Tailored Polymer Membranes with an Integrated Extra-Thin Separation Layer for Robust Nanofiltration

A novel water-stable two-dimensional zeolitic imidazolate frameworks thin-film composite membrane for enhancements in water permeability and nanofiltration performance

Enhancing Ion Separation Efficiency: Janus Charged Nanofiltration Membrane Fabricated via Polyethyleneimine-Manipulated Interfacial Polymerization

Encapsulated Polyethyleneimine Enables Synchronous Nanostructure Construction and in Situ Functionalization of Nanofiltration Membranes.

Thermal-induced surface densification of polyimide asymmetrical membranes for efficient organic solvent nanofiltration

A combined interfacial polymerization and in-situ sol-gel strategy to construct composite nanofiltration membrane with improved pore size distribution and anti-protein-fouling property

Polyamide‐imide Nanofiltration Hollow Fiber Membranes with Elongation‐induced Nano‐pore Evolution

Construction of a gelatin scaffold with water channels for preparing a high performance nanofiltration membrane

Organic solvent nanofiltration membrane with improved permeability by in-situ growth of metal-organic frameworks interlayer on the surface of polyimide substrate

Designing nanofiltration hollow fiber membranes based on dynamic deposition technology

Highly permeable and acid-resistant nanofiltration membrane fabricated by in-situ interlaced stacking of COF and polysulfonamide films

Breaking the Trade-off between Selectivity and Permeability of nanocomposite membrane modified by UIO66@PDA through nonsolvent thermally induced phase separation method

Positively charged nanofiltration membranes mediated by a facile polyethyleneimine-Noria interlayer deposition strategy