Abstract:Traditional nanofiltration (NF) membranes meet a bottleneck in throughput due to the lack of flexibility in pore structure control of the polyamide selective layer. This work developed a highly-permselective NF membrane by creating a controlled polyarylester selective layer via a facile method of metal-phenolic network (MPN) modulated interfacial polymerization between 5,5,6′,6′-tetrahydroxy-3,3,3′,3′-tetramethyl spirobisindane (TTSBI) and trimesoyl chloride (TMC). It was hypothesized that in the presence of FeCl3, the catechol groups of TTSBI first formed a Fe3+/TTSBI complex to construct the MPN and subsequently reacted with TMC, eliminating structural defects in the selective layer. The solution chemistry studies and membrane optimization results verified the significant role of Fe3+ in forming metal-phenolic coordination and thus defectless pore structure. The resulted Fe-TTSBI-TMC membrane exhibited greatly reduced pore size of 0.68 nm and narrow pore size distribution. The rigid and twisted feature of TTSBI endowed the polyarylester layer with high porosity. This ingeniously designed synergistic effect rendered the resulted membrane with a high pure water permeability of 15 L m−2 h−1 bar−1, about 3 times higher than typical polyamide NF membrane prepared by piperazine and TMC; while achieved high salt and molecular rejections (e.g., 98% rejection of Na2SO4, 100% rejection of vitamin B12), exhibiting superior perm-selective properties as compared to most NF membranes incorporating microporous materials. Accurate separation between molecules of different sizes of vitamin B2 and vitamin B12 was achieved with 100% efficiency. Hence, this work provides a promising alternative for skillful control of NF membrane pore structure towards efficient and precise molecular separation.

Surface Effect-Tailored Polymer Membranes with an Integrated Extra-Thin Separation Layer for Robust Nanofiltration

An Acid Resistant Nanofiltration Membrane Prepared from a Precursor of Poly(s-Triazine-amine) by Interfacial Polymerization

Tailoring Pore Size of Positively-Charged Nanofiltration Membrane Via a Facile Self-Assembly Method

Combing three-dimensional water channels and ultra-thin skin layer enable high flux and stability of loose polyimide/SiO<sub>2 </sub>nanofiltration membranes at low operating pressure via one step in-situ modification

Pore Size Tailoring from Ultrafiltration to Nanofiltration with PVC-g-PDMA Via Rapid Immersion Thermal Annealing

Nanofiltration membranes with enhanced performance by constructing an interlayer integrated with dextran nanoparticles and polyethyleneimine coating

Polyarylester thin films with narrowed pore size distribution via metal-phenolic network modulated interfacial polymerization for precise separation

Molecular Design of the Polyamide Layer Structure of Nanofiltration Membranes by Sacrificing Hydrolyzable Groups Toward Enhanced Separation Performance.

Ultrapermeable Organic Solvent Nanofiltration Membranes with Precisely Tailored Support Layers Fabricated Using Thin-Film Liftoff

Highly permeable and acid-resistant nanofiltration membrane fabricated by in-situ interlaced stacking of COF and polysulfonamide films

Codeposition of Catechol–polyethyleneimine Followed by Interfacial Polymerization for Nanofiltration Membranes with Enhanced Stability

Porous Organic Polymer Interlayers Modulated Nanofiltration Membranes for Ultra-Permselective Li+ /mg2+ Separation

Interface Engineering of Microporous Polypropylene Membranes for Polyamide Thin-Film Composite Nanofiltration Membranes with Robust Structure and Superior Performance

Thin-film composite nanofiltration membrane based on polysulfonamide for extremely acidic conditions

Nanofiltration Membranes with Hydrophobic Microfiltration Substrates for Robust Structure Stability and High Water Permeation Flux

Nanofiltration membrane fabricated by combination of phase inversion and stepwise interfacial complexation

Designing Scalable Dual-Layer Composite Hollow Fiber Nanofiltration Membranes with Fully Cross-Linked Ultrathin Functional Layer

Surface/Interfacial Design and Tailoring of Polymeric Membranes for Liquid-Phase Separation

Nanofiltration membrane with asymmetric polyamide dual-layer through interfacial polymerization for enhanced separation performance

PolyMOF Interlayers Modulated Interfacial Polymerization of Ultra-thin Nanofiltration Membranes with Efficient and Stable Desalination Performance

New type of nanofiltration membrane based on crosslinked hyperbranched polymers