Abstract:Functional additives have been widely utilized for the membrane structure modulation and performance improvement during the nonsolvent-induced phase separation process, but the resulted membranes easily suffer from additives' inhomogeneous dispersity and compatibility with the polymer matrix. Herein, a facile and robust strategy, i.e., one-step water-induced phase separation, was proposed for the preparation of polyelectrolytes-contained composite membranes. Polyanion (dopamine modified polyacrylic acid) and polycation (quaternized chitosan paired with bis(trifluoromethane-sulfonyl)imide) were first premixed in dimethyl sulfoxide and used as polyelectrolyte additives in a polysulfone (PSF) solution, and then a uniform PSF-based casting solution was readily obtained. During the solvent–water exchange process, polymer solidification and polyelectrolyte complexation were simultaneously triggered, in situ generating a polyelectrolyte complex fixed within the membrane matrix. Ultrafiltration membranes with hierarchical structures were notably tailored through altering the concentration, molecular weight, and type of polyelectrolytes. The obtained membrane exhibited a water flux of 672 L·m–2·h–1, three times over the raw PSF membrane, while almost maintaining high bovine serum albumin (BSA) rejection. This work paves a straightforward and convenient path for the preparation of composite membranes with tunable architecture and properties.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c24059.Characterization of PAA-DA (Figure S1); SEM image of the polyelectrolyte complex from QCS-TFSI and PAA-DA (Figure S2); surface SEM images of different UF membranes (Figure S3); the porosity and pore size distribution of different membranes (Figure S4); LF-NMR T2 spectra of PSF and PSF-PEs-2.0 membranes (Figure S5); the viscosities of casting solutions with different molecular weight of PAA (Figure S6); and cross-sectional SEM images of UF membranes with different molecular weight of PAA (Figure S7) (PDF)This article has not yet been cited by other publications.

Enhancing thin-film composite polyethersulfone hollow fiber membranes through alkali-induced interfacial polymerization modification for effective separation of monovalent/divalent salts

Aminated Substrate Based Thin Film Composite Nanofiltration Membrane with High Separation Performance by Chemically Inhibiting the Intrusion of Polyamide

Ionic Hyperbranched Poly(amido-amine)-Incorporated Nanofiltration Membranes for High-Efficiency Dye Desalination

Tailoring the Selectivity of Quasi-Pims Nanofiltration Membrane Via Molecular Flexibility of Acyl Chloride Monomers for Desalination from Dye Effluents

Fabrication of Ph-Sensitive Superhydrophilic/Underwater Superoleophobic Poly(vinylidene Fluoride)-Graft-(sio2 Nanoparticles and PAMAM Dendrimers) Membranes for Oil-Water Separation.

Amphiphilic Interlayer Regulated Interfacial Polymerization for Constructing Polyamide Nanofiltration Membranes with High Perm-Selectivity of Mono-/Divalent Salts

Combing three-dimensional water channels and ultra-thin skin layer enable high flux and stability of loose polyimide/SiO<sub>2 </sub>nanofiltration membranes at low operating pressure via one step in-situ modification

Development of antifouling nanofiltration membranes for separation of dye/salt mixture through incorporation of novel polyelectrolyte-decorated silica

Enhancing the Antifouling and Antimicrobial Properties of Poly(ether sulfone) Membranes by Surface Quaternization from a Reactive Poly(ether sulfone) Based Copolymer Additive

Hydrophilic and Anti-Fouling Polyethersulfone Ultrafiltration Membranes with Poly(2-Hydroxyethyl Methacrylate) Grafted Silica Nanoparticles As Additive

Surface Effect-Tailored Polymer Membranes with an Integrated Extra-Thin Separation Layer for Robust Nanofiltration

Engineering novel high-flux thin-film composite (TFC) hollow fiber nanofiltration membranes via a facile and scalable coating procedure

Facile post-treatment of PSf membranes with hexane for fractionation and concentration of alkaline textile wastewater

Evading the permeance-selectivity trade-off dilemma in electrospray-assisted interfacial polymerization polyamide thin-film composite membrane through electrospinning nanofibers interlayer

Designing Scalable Dual-Layer Composite Hollow Fiber Nanofiltration Membranes with Fully Cross-Linked Ultrathin Functional Layer

One-Step Water-Induced Phase Separation Simultaneously Triggering Polymer Solidification and Polyelectrolyte Complexation for Porous Ultrafiltration Membranes

Incorporation of an Intermediate Polyelectrolyte Layer for Improved Interfacial Polymerization on PAI Hollow Fiber Membranes

Facile Preparation of Dense Polysulfone UF Membranes with Enhanced Salt Rejection by Post-Heating

A novel polysulfate hollow fiber membrane with antifouling property for ultrafiltration application

Enhancing the perm-selectivity of thin-film nanocomposite membranes intercalated with cyclodextrin-chelated Metal-Organic Framework via modulated interfacial polymerization

Engineering High-Effective Antifouling Polyether Sulfone Membrane with P(Peg-Pdms-Kh570)@Sio2 Nanocomposite Via In-Situ Sol-Gel Process